BOOTH WATER TREATMENT

Coagulants and Flocculants

The process

In the spray painting process in booths the particles of paint that do not go on the manufactured article constitute the so-called "over spray" that is collected in an aqueous recirculation solution, the water film. In these processes, it is essential to prevent it from sticking to the walls of the booth and progressively obstructing the water recirculating system.

For the denaturation treatment, chemical products are then used, which make the paint inert and coagulate into small flakes which are then removed from the water by special mechanical devices.

The main chemical products of the denaturation and coagulation treatment are primary coagulants and polyelectrolytes, also called flocculants.

Fiprokim products

Fiprokim offers a wide range of products for the clarification and purification of industrial waters, both wastewater and process water. The line, called Waterfip, is divided into two groups, coagulants and flocculants, to be used in chemical-physical or dynamic purification plants and for water treatment in painting booths, containing dispersed paints or suspended particulates.

 
Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

 

Dedicated products

  • WATERFIP

     

    Products for the clarification and purification of industrial waters, both waste and process ones. The line is divided into two groups, coagulants and flocculants, to be used in chemical-physical or dynamic purification plants and for water treatment in painting booths.

  • FIPROCIDE

    Products with a broad spectrum of action designed for the elimination of bacterial colonies in waste and process water, mildews, algae, and bad smells.

 

A little bit of us      

Our Production

All Fiprokim product lines are produced at our headquarters in Altavilla Vicentina. The wide range of mixers and special equipment allows Fiprokim to have considerable productive capacity.

Customized formulation

The company has a research and development laboratory made up of technicians specialized in the various areas. The study of technical solutions and the selection and control of raw materials are only the first fundamental step in the process of formulating an effective product.

Our Company

Fiprokim has more than twenty years of experience in research, formulation, production and marketing of chemical products for the treatment of metals and their detergents and cooling lubricants for the mechanical processing of metals.

Address

Fiprokim S.r.l.

Via dei Laghi, 50

36077 - Altavilla Vicentina (VI)  Italy

Contact

Opening Hours

Monday          8.00-13.00 e 14.00-18.00

Tuesday          8.00-13.00 e 14.00-18.00

Wednesday    8.00-13.00 e 14.00-18.00

Thursday        8.00-13.00 e 14.00-18.00

Friday             8.00-13.00 e 14.00-18.00

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.