Stamping - Drawing

Products suitable for metal stamping, drawing, forming and bending operations

Fiprokim and oils for stamping, forming, drawing

The products of the LUBROFIP lines dedicated to metal stamping, drawing, forming and bending operations are formulated in the Fiprokim laboratories after careful selection of the raw materials and scupulous control tests.

There are whole and emulsifiable products, both mineral-based products and synthetic ecological-based ones. There are also products without chloriparaffin. 

Machines

These products, used whole or emulsified in water, find application in cold metal stamping presses.

Processing and materials

Specific for metal stamping, drawing, forming and bending operations.

 
Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

 

Dedicated Products

  •  LUBROFIP 5010

    Oil for stamping, shearing and drawing containing special greasing, wetting and E. P. additives. Particolary suitable for even severe operations.

  •  LUBROFIP 5507

    Whole fluid based on synthetic esters from renewable and vegetable sources. Suitable for stamping, drawing and shearing operations containing greasing and E. P. additives. The product is free from chlorine.

  •  LUBROFIP 5511

    LUBROFIP 5511 is an evaporable fluid suitable for fast shearing of laminations and for non-severe drawing of thin or medium thickness sheets. It is also particularly suitable for zamak, aluminum and its alloys.

  •   LUBROFIP 4000 LINE

    Line of emulsifiable products also suitable for stamping, bending, forming of metals.

 

A little bit of us      

Our Production

All Fiprokim product lines are produced at our headquarters in Altavilla Vicentina. The wide range of mixers and special equipment allows Fiprokim to have considerable productive capacity.

Customized formulation

The company has a research and development laboratory made up of technicians specialized in the various areas. The study of technical solutions and the selection and control of raw materials are only the first fundamental step in the process of formulating an effective product.

Our Company

Fiprokim has more than twenty years of experience in research, formulation, production and marketing of chemical products for the treatment of metals and their detergents and cooling lubricants for the mechanical processing of metals.

Address

Fiprokim S.r.l.

Via dei Laghi, 50

36077 - Altavilla Vicentina (VI)  Italy

Contact

Opening Hours

Monday          8.00-13.00 e 14.00-18.00

Tuesday          8.00-13.00 e 14.00-18.00

Wednesday    8.00-13.00 e 14.00-18.00

Thursday        8.00-13.00 e 14.00-18.00

Friday             8.00-13.00 e 14.00-18.00

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.