top of page

FIPRO SG 1020

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

FIPRO SG 1020 is a strongly alkaline solid formulation used for the immersion degreasing, with or without ultrasound, of ferrous material and copper alloys surface, in galvanic systems; the product is particularly suitable for the removal of oils or cleaning pastes or fats.
FIPRO SG 1020 consists of a mixture of caustic alkalis, alkaline polyphosphates, sequestering and complexing agents and non-ionic and anionic surfactants.

Usage and Applications

FIPRO SG 1020 should be used by immersion in aqueous solution, under the following operating conditions:
Treatment time 2-5 minutes
Bath temperature 50-70 ° C
Concentration of the bath 50 ÷ 100 g / l
The optimal use values ​​will, however, be set by the Fiprokim Technical Service, case by case, during the start-up phase of the plant, according to the quality and quantity of foreign substances to be removed present on the surface of the material, of the type of material to be removed. treat and the plant itself.

Parametro
Valore

Bathroom control

The control of the bath is carried out by determining the free alkalinity, as follows:
take 10 ml of bath using a calibrated pipette, place them in a conical flask, dilute them with distilled water and add a few drops of phenolphthalein. The solution will turn violet red. Titrate with acid (sulfuric or hydrochloric) 0.1N until the color changes from violet to colorless.
The number of ml of 0.1N acid consumed for toning gives the bath's free alkalinity score:
a bath prepared at 50 g / l has a score of approximately 6.0 while one prepared at 100 g / l has a score of approximately 12.

Applicazione
Concentrazione

Alimentation

The bathroom must be checked at least once or twice a day and maintained at the concentration established at the time of start-up. If the score is lower than its initial value, add 8.5 kg of FIPRO SG 1020 to the bath for each missing point and for every 1000 l of bath.

Storage

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Highlights

  • Multimaterial degreasers

  • Pre and Post processing treatments

  • Low environmental impact alternatives

  • Longevity and effectiveness

  • Periodic checks

  • Formulated, produced and controlled internally

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPRO SG 1021

Product in alkaline powder, polyphosphates, silicates, carbonates and gluconates. Without surfactants, it is suitable for electroplating, removal of oils and pastes.

FIPRO SG 1025

Alkaline blend of polyphosphates, surfactants and silicates. Alkaline degreaser suitable for cleaning after molding, cutting, or deformation. Removes dirt and grease, even pigmented, fatty acids from drawing operations. Can be used with hard water.

FIPRO SG 1023

Alkaline degreaser based on sequestrants, polyphosphates, controlled foam surfactants and silicates. Also suitable at low temperatures for spray or immersion degreasing (with and without ultrasound) of iron, steel, zinc and alloys, extruded and die-cast aluminum before phosphating.

FIPRO SG 1024

Formulated based on carbonates, organic protectants and sequestering agents. Application range similar to Fipro SG 1023.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page