top of page

FIPRO SG 580

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

FIPRO SG 580 is an alkaline interoperational degreaser used for washing and simultaneous anticorrosive protection of the processed material. Designed for the removal of machining oils from surfaces in ferrous material or aluminum alloys in spray treatment systems. FIPRO SG 580 is a synthetic formulation free from mineral oils.
The degree of protection provided by FIPRO SG 580, if not rinsed, is compatible with the storage of the treated materials in covered warehouses and can be evaluated with the UNI 9374 and 9375 regulations.

Usage and Applications

The product can be used as a protective interoperational degreaser in single-stage systems or as an antioxidant in the final rinses before the drying stage. The main use of FIPRO SG 580 is in spray treatment plants or where there is the possibility of combining a mechanical action with a controlled foam washing solution.

Concentration FIPRO SG 580: 2 - 6%
Solution temperature: 30 - 70 ° C
If used as an antioxidant in the final rinse concentrations between 1 and 2%.

Parametro
Valore

Control of bathing

Concentration control is performed by titration of the total alkalinity present in the solution, using the following method:

  • Take 10 ml of washing solution and place them in a flask

  • Add about 6-8 drops of Bromine Cresol Green Indicator

  • Titrate with 0.1 N hydrochloric acid until turning from blue to yellow

  • The ml of 0.1 N hydrochloric acid used represent the total alkalinity value.

To obtain the concentration in g / l, multiply the value obtained by the fixed number “4.65”, in the usual working concentration ranges (ie for values ​​between 20 and 50 g / l).
The frequency of checks must be established according to the specific application. In the absence of particular conditions, a daily concentration determination is recommended, sufficient to establish the trend in product consumption.

Applicazione
Concentrazione

Storage

For the handling and storage of the product it is recommended to comply with the provisions of the relative
safety data Sheet. If possible, use covered warehouses avoiding exposing the product to heat sources or
temperatures below 5 ° C.

Highlights

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  •  Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPRO SG 589

Soda-based alkaline degreaser, organic sequestrants, potash, and phosphate-free. Easy to rinse, it is suitable for the removal of heavy greases, molding pastes, protective and molding oils, whole and emulsifiable. Able to remove polymer films.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page