top of page

FIPRO SG 589

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

FIPRO SG 589 is a highly efficient alkaline degreaser for pre-treatment cycles on steel. It can be used by immersion or spray on steel and stainless steel.

Usage and Applications

FIPRO SG 589 is used in aqueous solution, by spray or by immersion.
Operating conditions vary depending on how they are used, as described below.
                                                       Spray immersion
Bath temperature:                      60 ÷ 80 ° C 40 ÷ 70 ° C
Treatment time:                            5 ÷ 20 '2 ÷ 10'
Pressure:                                        1 ÷ 3 bar
Formation:                                    100 ÷ 200 g / l 20 ÷ 100 g / l
Score:                                             52 ÷ 104 ml 10.4 ÷ 52 ml

Physical-Chemical Data

Parametro
Valore
Appearance
Colorless liquid
Density
~1.4 Kg/l
Viscosity (DIN 53211, 4 mm cup, 20 °C)
19 second
Surface tension (10 g/l, 20 °C)
~68 mN/m
Stability
da - 7 °C a + 40 °C
Conductivity (10 g/l, 20 °C)
13.3 mS/cm

Control of bathing

Take 10 ml of bath, pour them into a conical flask, add about 50 ml of demineralized water and 3 ÷ 5 drops of phenolphthalein indicator, titrate with 0.1 N sulfuric acid until the color changes from pink to colorless. The ml of acid consumed for the color change represents the degreaser score.
A bath prepared at a concentration of 20 g / l will have a score of 10.4 ml.

Applicazione
Concentrazione

Alimentation

The bath must be maintained at the score set at the time of system start-up by adding FIPRO SG 589 at a rate of 1.9 kg for each missing point and for each 1000 l of solution and 0.25 g / l of additive.

Tanks and Storage

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Highlights

  • Multi-material degreasers

  • Pre and Post processing treatments

  • Low environmental impact alternatives

  • Longevity and effectiveness

  • Periodic checks

  • Formulated, produced and controlled internally

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  •  Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPRO SG 580

Multimetal interoperational for low pressure applications, guarantees protection of parts for 1-1.5 months. Used to degrease surfaces and multimetal components, in the case of cast iron it is also used in the powder pre-painting phase.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page