top of page

FIPRODISK 101

SOLUTIONS FOR MAINTENANCE AND CLEANING OF MACHINES AND PLANTS

Technical features

FIPRODISK 101 is used to remove rust, oxides and encrustations from ferrous material without attacking the base metal.
Descaling of limestone deposits from water circulation systems (heat exchangers, various equipment) in all industries.
Removal of oxide, chromium, zinc and cadmium coatings.

Physical-Chemical Data

Parametro
Valore
Appearance
Straw yellow liquid
Smell
Characteristic
pH
~1
Foam formation
Low

Usage and Applications

The concentrations of use vary from 5 to 50% by volume.
It is normally used at room temperature. To accelerate its action against rust or encrustations, a maximum temperature of 60 ° C can be reached.
For the descaling of equipment with circulation, introduce slowly from the bottom of the system to avoid air pockets and to ensure that there is a vent for the vapors that form during descaling.
During pickling or descaling, titrate the solution at intervals.
When the concentration in FIPRODISK 101 stabilizes at a certain value, the operation is finished.
It passes to the rinsing with water and a neutralization is carried out with an alkaline product.

Slowly add FIPRODISK 101 to cold water and never vice versa. The tanks must be built in antacid material such as wood, ceramic, viplated or rubberized iron.

Applicazione
Concentrazione

Control of bathing

Owner according to the following procedure:


  • Take 10 ml of the solution to be analyzed and place them in the glass beaker (or flask) add 20 ml of distilled water

  • Add 5-8 drops of METHYLORANGE indicator. The solution will turn red

  • Titrate the solution obtained, keeping it stirred, with 1 N NaOH until a YELLOW color is obtained. This change identifies the end of the titration

Alimentation

To obtain the concentration in% multiply the value obtained by the fixed number 1.6. Then bring the concentration to the required value.

Precautions

FIPRODISK 101 is a strongly acid product. Handle wearing gloves and protective clothing.
Use in well-ventilated areas or equip the tanks with aspirators.

Highlights

  • Extremely effective against any type of oxide or salt deposits

  • Inhibited, therefore it does not give rise to corrosion in the treated system

Application

  • All water circulation systems (boilers, heat exchangers, towers)

  • Degreasing tanks

  • Phosphodegreasing lines

Are you interested?

Write to us and we'll get back to you as soon as possible!

Privacy

I hereby declare that I am sixteen years of age or older, and if under sixteen, that I have been authorised by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

Communications

I consent to the processing of my personal data. For the forwarding of the newsletter, communications via telephone (sms, WhatsApp, voice call)

Related Products

FIPRODISK 102

Highly inhibited chlorine-based product with additive with anticorrosion. Pickling agent for iron, descaling agent for systems and exchangers (not in yellow alloy), removal of limestone, saline, phosphatic and cement deposits.

FIPRODISK 109

Phosphoric based, with organic acids and enriched with dispersants, dedusting agents, complexing agents, surfactants and cosolvents. Suitable for the descaling of phosphodegreasing tunnels even without rinsing or neutralization, and for the degreasing of stainless steel, copper, brass.

FIPRODISK 103

Phosphoric based formulation, with additives with inhibitors and anticorrosives. It can be used as a light pickling agent for stainless steel, and etching, pickling and descaling agent for galvanized. Can also be used as a degreaser for aluminum.

FIPRODISK 104

Formulated similar to Fiprodisk 102, it is a pickling agent for iron, with a descaling action for plants and exchangers. Suitable for the removal of calcareous, saline, phosphatic and cement deposits.

A LITTLE ABOUT US

OUR PRODUCTION

All Fiprokim lines are produced at our facility in Altavilla Vicentina.
The wide range of mixers and equipment allows us to have considerable production power.
Fusti di stoccaggio
FREZZE 4-mod.jpg

Customised products

Fiprokim has a research and development laboratory staffed by technicians specialised in various fields.

The study of technical solutions, the selection and control of raw materials are part of the process of creating an effective product.

OUR COMPANY

Fiprokim has more than 20 years' experience in the research, formulation, production and marketing of chemical products for the treatment of metals  and their cleaning and of coolants for mechanical metalworking.

immagine azienda ridimensionata.jpg
bottom of page