top of page

ULTRAFIP 604

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

ULTRAFIP 604 is a caustic alkaline liquid product formulated for the degreasing of stainless steel and ferrous materials. It is indicated for the removal of oils, greasy substances and carbon residues.
Since the product is highly caustic, it causes surface aggression of non-ferrous alloys such as aluminum alloys or galvanized iron. It is therefore not recommended to use ULTRAFIP 604 on these types of alloys unless you want to obtain a slight attack on the surface (priming effect) for subsequent painting. The product must be rinsed thoroughly after degreasing.
The cleaning power of ULTRAFIP 604 is very high, thanks to its consistent package of low foam surfactants.

Usage and Applications

ULTRAFIP 604 is used in spray or immersion degreasing systems in the following operating conditions:
ULTRAFIP 604 concentration: 10 - 20 gr / lt
Immersion times: 3 - 6 '
Spray times 1 - 2 '
The particularity of the formulation of this product also makes it suitable for use with ultrasound.

Parametro
Valore

Control of bathing

Take 10 ml of bath, put them in a flask (or beaker), add a few drops of METHYLORANGE indicator.
The solution has a YELLOW color. Titrate with 0.1 N HCl until the RED color appears.
The ml of 0.1 N hydrochloric acid consumed in the titration indicate the score and the total alkalinity of the ULTRAFIP 604 bath. To obtain the concentration of the bath in gr / l, the score must be multiplied by the fixed factor 1.50.

Applicazione
Concentrazione

Alimentation

The bath should be checked periodically and maintained at the established concentration with regular additions. A continuous feeding by means of a dosing pump allows to obtain the best results.
For each missing point and for every 1000 liters of bath, add about 1.50 kg of ULTRAFIP 604.

Storage

The product in its original packaging and stored in a suitable way (+ 7 ÷ 35 ° C) has a validity period of 2 years from the date of production. It is recommended not to store at temperatures below 5 ° C to avoid freezing phenomena.

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

ULTRAFIP 601

Strongly alkaline soda-based product, with sequestering, dedusting, dispersing and anti-scaling agents. usable as a degreaser and as a dephosphating agent.

ULTRAFIP 607

Slightly alkaline product, based on soaps, surfactants and cosolvents. It is a totally organic product, free of soda, silicates, phosphates. Suitable for removing oils and lapping pastes from iron, brass, steel, extruded and die-cast aluminum, galvanized and zamak.

ULTRAFIP 602

Caustic alkaline liquid product formulated for the degreasing of stainless steel and ferrous materials. Indicated for the removal of oils, greasy substances and carbon residues.

ULTRAFIP 610

Alkaline product, based on soaps, surfactants, sequestrants, alcohol and amines, free of mineral salts. Suitable for the removal of oils, greases, polishing pastes, tumbling, lapping, from stainless steel, aluminum, plastic. On brass and copper it also exerts a deoxidizing and whitening action. The surface remains hydrophobic.

ULTRAFIP 605

Based on organic acids, with additives with surfactants. Suitable for removing oils and tumbling and polishing pastes used in eyewear and cutlery. For stainless steel, aluminum, plastic, brass, copper, galvanized material (after testing). On brass and copper it exerts a deoxidizing and brightening action.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page