LUBROFIP 4000

 

MINERAL-BASED EMULSIFIABLE COOLING LUBRICANTS

Emulsifiable cooling lubricants based on mineral oil

The LUBROFIP 4000 line is made up of emulsifiable cooling lubricants based on highly refined mineral oil, suitable for a variety of chip removal and stamping operations.

All products of the LUBROFIP 4000 line are free from formaldehyde donors.

Efficiency

The appropriate additives allow the cooling lubricants of the LUBROFIP 4000 line to be used even in the most severe cutting operations, allowing a lower consumption of tools and a better surface finish of the piece.

Suitable for both single tanks and centralized plants.

Safety of use

The products of the LUBROFIP 4000 line contain neither substances present in the SVHC Candidate List nor carcinogenic substances.

The emulsions obtained from these products are well tolerated by the operators.

 

Stability

The effectiveness of the emulsifying package and the appropriate protection against bacterial proliferation guarantee a remarkable life of the emulsion in the tank.

 

Certifications

Our products are produced in full compliance with EU regulations.

Highlights

  • Emulsifiable oils for metal processing

  • Safe for the operator

  • Formulated, produced and checked at the Fiprokim headquarters in Altavilla Vicentina

  • Multimetal and specific products

  • Possibility of customization

 

Areas of intervention

  • Can be used for numerous cutting and stamping operations

  • Turning, milling, tapping, drilling, grinding, cutting, broaching

  • N/C machines, single and multi-spindle machines, lathes, milling machines, etc.

Interested?

Write us now!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

 
 

Products of the LUBROFIP 4000 Line

  • LUBROFIP 4011

     

    Multimetal emulsifiable oil with a high content of mineral oil free from formaldehyde donors. Thanks to its particular additives it is also suitable for very severe operations.

  • LUBROFIP 4012

     

    Multimetal  semisynthetic emulsifiable oil free from formaldehyde donors. Thanks to its particular additives it is suitable both for grinding operations and for more severe ones.

  • LUBROFIP 4013

     

    Multimetal emulsifiable oil with a high content of mineral oil free from boron and formaldehyde donors. Thanks to its particular additives it is also suitable for very severe operations

  • LUBROFIP 4015

     

    Multimetal emulsifiable oil with a high content of mineral oil free from boron and formaldehyde donors. Specifically designed for use with hard water. Thanks to its particular additives it is also suitable for very severe operations. 

  • LUBROFIP 4017

     

    Multimetal emulsifiable oil with a high content of mineral oil free from boron, chlorine and formaldehyde donors. Thanks to its particular additives it is also suitable for very severe operations

  • LUBROFIP 4033

     

    Multimetal emulsifiable oil free from chlorine, boron and formaldehyde donors suitable for grinding operations.

 

A little bit of us

Our Production

All Fiprokim product lines are produced at our headquarters in Altavilla Vicentina. The wide range of mixers and special equipment allows Fiprokim to have considerable productive capacity.

Customized formulation

The company has a research and development laboratory made up of technicians specialized in the various areas. The study of technical solutions and the selection and control of raw materials are only the first fundamental step in the process of formulating an effective product.

Our Company

Fiprokim has more than twenty years of experience in research, formulation, production and marketing of chemical products for the treatment of metals and their detergents and cooling lubricants for the mechanical processing of metals.

Address

Fiprokim S.r.l.

Via dei Laghi, 50

36077 - Altavilla Vicentina (VI)  Italy

Contact

Opening Hours

Monday          8.00-13.00 e 14.00-18.00

Tuesday          8.00-13.00 e 14.00-18.00

Wednesday    8.00-13.00 e 14.00-18.00

Thursday        8.00-13.00 e 14.00-18.00

Friday             8.00-13.00 e 14.00-18.00

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.