PRODUCTS

Thanks to their experience of over ten years, FIPROKIM technicians have developed specific formulations for metalworking. There are therefore several lines of neat and emulsifiable fluids of  modern conception, a series of auxiliary products for emulsions and a line of interoperational protective ones.

The products are developed, analyzed and checked at the Fiprokim laboratories.

Fiprokim is also able to supply the whole series of industrial oils for the lubrication of the machine tool .

EMULSIFIABLE AND SOLUBLE PRODUCTS

EMULSIFIABLE AND SOLUBLE PRODUCTS COOLING LUBRICANTS FOR  METALWORKING.

 
 
  • LUBROFIP 4000 LINE

    Emulsifiable fluid based on highly refined mineral oil appropriately additivated for all the mechanical processes of cutting, grinding and stamping.

     

  • LUBROFIP 4500 LINE

     

    Emulsifiable fluids based on synthetic esters derived from renewable and vegetable sources suitably additivated for all the mechanical processes of cutting, grinding and stamping.

  • LUBROFIP 4800 LINE

    Line of oil-free, soluble products.

    In water they form a clear solution suitable for grinding and medium-severe mechanical processing.

NEAT OILS

NEAT COOLING LUBRICANTS FOR METALWORKING

 
 
 
  • LUBROFIP 5000 LINE

    Line of neat oils for metalworking. Suitable for cutting, chip removal, lapping, drilling, deep drilling, broaching, stamping, forming, drawing, wiredrawing.

     

  • LUBROFIP 5500 LINE

     

    Line of neat oils for metalworking based on renewable and vegetable sources. Suitable for cutting, chip removal, lapping, drilling, deep drilling, broaching, stamping, forming, drawing, wiredrawing.

 

INDUSTRIAL LUBRICANTS

INDUSTRIAL LUBRIFICANTS

 
  • LUBROFIP 8000 LINE

     

    The LUBROFIP 8000 industrial lubricants line is composed of oils for the machine tool functioning:  hydraulic circuits, slideways, compressors, gears, bar feeders, spindle..

     

AUXILIARY PRODUCTS FOR EMULSIONSADDITIVI PER LA ADDITIVES FOR TANK CLEANING AND FOR EMULSION IN USE CORRECTION

 
  • FIPRO SG 1015

    FIPRO SG 1015 is a detergent formulated to allow cleaning and disinfection of circuits without interrupting the activity of machine tools before emulsion change..

     

  • FIPRODEFOAM

     

    Antifoam fluid for emulsions to be used in case of excessive foam in the tank.

  • FIPROCIDE 78

     

    Fungicidal-bactericidal additive for emulsions. It helps to restore the correct pH values ​​and to control the bacterial flora of the emulsion.

  • ALCAFIP 1053

     

    Additive for emulsion pH recovery.

     

  • FIPRO HD 40F

     

    Additive to reduce any excessive hardness of the emulsion.

 

PROTECTIVE PRODUCTS

POST-OPERATIONAL PROTECTIVE PRODUCT LINE FOR METALS

 
Address

Fiprokim S.r.l.

Via dei Laghi, 50

36077 - Altavilla Vicentina (VI)  Italy

Contact

Opening Hours

Monday          8.00-13.00 e 14.00-18.00

Tuesday          8.00-13.00 e 14.00-18.00

Wednesday    8.00-13.00 e 14.00-18.00

Thursday        8.00-13.00 e 14.00-18.00

Friday             8.00-13.00 e 14.00-18.00

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.