Technical features
FIPRO SG 1023 is an alkaline liquid formulation used for spray or immersion degreasing (with and without ultrasounds) of iron, steel, zinc and alloys, extruded and die-cast aluminum before their chemical conversion treatment such as phosphating. The product is specifically designed to give a strong emollient action on any type of dirt or encrustation already at room temperature.
FIPRO SG 1023 consists of an aqueous solution of sequestering agents, polyphosphates, controlled foam surfactants and silicates.
Usage and Applications
FIPRO SG 1023 must be used, by spray or immersion, in aqueous solution, under the following operating conditions:
Treatment time 3 '÷ 10'
Bath temperature 40 ÷ 80 ° C
Concentration 2 ÷ 6%
The optimal use values will, however, be set by the Fiprokim Technical Service, case by case, at the time of the plant start-up, according to the quality and quantity of foreign substances to be removed present on the surface of the material and the type of plant. same.
Parametro | Valore |
|---|
Control of bathing
The bath is checked by periodically determining the free alkalinity.
Take 10 ml of bath and place them in a flask. Add 50 ml of demineralized water. Add phenolphthalein indicator hydroalcoholic solution. The solution will turn violet. Titrate with 0.1N acid until the pink color disappears. The ml of acid consumed represents the bath score.
A bath prepared at 20 g / l has a score of 3.7 ml.
Applicazione | Concentrazione |
|---|
Alimentation
The toilet must be checked periodically (at least once or twice a day) and maintained at the concentration established at the time of its start-up. For each missing point, for every 1000 liters of bath, add 5.5 kg of product.
Storage
Removal of whole and emulsifiable oils, fats and processing pastes
Dephosphating
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Highlights
Multi-material degreasers
Pre and Post processing treatments
Low environmental impact alternatives
Longevity and effectiveness
Periodic checks
Formulated, produced and controlled internally
Application
Removal of whole and emulsifiable oils, fats and processing pastes
Dephosphating
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Prodotti Correlati
UN PO' DI NOI
