top of page

FIPRO SG 562

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

FIPRO SG 562 is a low foam liquid degreaser suitable for washing all metals in both spray washing machines and immersion tanks.
Ideal for removing, even at low temperatures, the most stubborn contaminants such as oils, greases, molding and drawing pastes, and carbonized oils.
FIPRO SG 562 provides, if not rinsed, temporary rust protection on ferrous material. FIPRO SG 562 is suitable for cleaning aluminum and stainless steel molds in the pork and beef processing industries.

Usage and Applications

Spray application:
Use concentrations from 20 to 100 g / l with water. Temperature of 30-70 ° C and contact time of 1-3 minutes. Follow with cold water rinse except in cases where rust protection is required.

Immersion and ultrasonic application:
Use concentrations from 50 to 100 g / l with water. Temperature from 55-75 ° C for at least 3 minutes or more. Follow with cold water rinse. For ultrasonic applications use the lowest concentrations.

Physical-Chemical Data

Parametro
Valore
Appearance
Clear yellowish liquid
Specific Weight at 15 °C
1.300 +/- 0.01 Kg/l
Rinseability
Good
Phosphates
Present
Foam formation
Low

Control of bathing

Take 10 ml of the solution to be analyzed and place them in the glass beaker (or flask), add 20 ml of distilled water. Add 5-8 drops of FENOPHTHALEIN indicator. The solution will take on a PINK color. Titrate the solution obtained, keeping it stirred, with Hcl N / 10 until a colorless change is obtained. This change identifies the end of the titration.

Applicazione
Concentrazione

Alimentation

To obtain the concentration in gr / lt multiply the value obtained by the fixed number 6.2
Then bring the concentration to the required value.

Highlights

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  •  Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interessato?

Scrivici subito!

Privacy

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

Comunicazioni

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale)

Prodotti Correlati

FIPRO SG 560

Solvent-based degreaser, low flammable, suitable for the removal of oils and greases from metal surfaces, in carpentries and workshops. Also suitable for the removal of paints and for the treatment of plastics, after verification of compatibility.

FIPRO SG 564

Volatile solvent that has a barely perceptible odor.
Designed for all cleaning operations, by rag or immersion, where the use of pure chlorinated solvents is not recommended.

FIPRO SG 565

Liquid, alkaline, amine-based interoperational degreaser. During storage, it guarantees 1-1.5 months of protection of the pieces. Can be used in single-stage and multi-stage washing machines, effective in the removal of numerous types of emulsifiable and whole oils.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page