Technical features
FIPRO SG 590 is an alkaline detergent for treatment cycles on steel, galvanized steel and aluminum. It is suitable for spray or immersion use.
Usage and Applications
FIPRO SG 590 is used in aqueous solution, by spray or by immersion, under the following conditions:
Treatment time: 2 - 4 minutes
Concentration: 8 - 30 g / l (6.2 - 23.1 ml / l)
Temperature: 50 - 65 ° C
Physical-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Colorless liquid |
Density | 1.27 |
pH | 10 |
Viscosity (DIN 53211, 4 mm cup, 20 °C) | 12 second |
Surface tension (10 g/l, 20 °C) | ~37 mN/m |
Stability | da - 7 °C a + 70 °C |
Specific electrical conductivity (10 g/l, 20 °C) | 3.2 mS/cm |
Control of bathing
Take 50 ml of sample and pour it into a 250 ml conical flask, add 50 ml of demineralized water and 5 drops of bromocresol green indicator.
Titrate with 0.1 N (0.05 M) sulfuric acid until the color changes from green to yellow. The ml consumed
match the bathroom score.
A bath prepared at 20 g / l has a score of 25.2 ml.
Applicazione | Concentrazione |
|---|
Alimentation
For each missing point and for every 1000 liters of bath add 0.8 kg of FIPRO SG 590.
Highlights
Removal of whole and emulsifiable oils, fats and processing pastes
Dephosphating
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Application
Removal of whole and emulsifiable oils, fats and processing pastes
Dephosphating
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Prodotti Correlati
UN PO' DI NOI
