Technical features
Trucks, buses, railway wagons, tankers and any other means of transport can be perfectly cleaned with FIPRO DET 651 both for normal applications with the use of brushes and by spraying.
FIPRODET 651 quickly and easily cleans external surfaces without affecting the normal gloss of paints or decals. It is also notable in cleaning indoor plastics. Applied by spray or jet at high pressure it is effective for removing road dirt, oil, grease, traces of burnt fuel from trolleys or coach work.
Usage and Applications
FIPRO DET 651 used pure or diluted in water, is used for degreasing by immersion of parts mounted on the engine; applied with rags and cleans heavy machinery, carriages, passageways, floors, etc.
It mixes instantly with water, requires no stirrers for dispersion.
The degreasing baths by immersion have an exceptional duration.
For cleaning large systems, it is necessary to apply FIPRODET 651 diluted with water for a maximum of 50% depending on the type or quantity of dirt to be removed. Leave the solution in contact with the dirt for a few minutes. If necessary, apply a second time, then rinse with a strong stream of water and dry. If possible, apply the product with high pressure pumps. When working outdoors, it is recommended to work in dim light and not in direct sunlight
For cleaning with steam or high-pressure pumps, prepare 20% solutions in the detergent dispenser. At the exit you will have the right concentration (0.2-2%). FIPRO DET 651 is also excellent for use with compressed air pumps
In immersion tanks FIPRO DET 651 can replace TCE or other dangerous solvents in the degreasing of components soiled with oils, greases or cleaning pastes
For this reason the product must be used cold, pure or diluted 50% with water. Leave the components soaked for the necessary time (even overnight if necessary), then rinse with a strong jet of water. It is used regularly in repair shops also as a substitute for the descaler of solvents
To clean walls, floors and painted surfaces, apply FIPRO DET 651 diluted with water (1 part of product and 20 parts of water) or more concentrated as appropriate.
Rub with abrasive brushes and at this point rinse and dry. It is perfect for cleaning without damaging the underlying surfaces
Parametro | Valore |
|---|
Highlights
It does not damage the treated surfaces
Suitable for plastic
Removes oils, fats and deposits
Applicazione | Concentrazione |
|---|
Application
For transport vehicles
Maintenance of internal industrial machinery (forklifts, trolleys)
For industrial surfaces subject to frequent and heavy pollution
Periodic cleaning of industrial floors
Removal of oils, pollutants, greases and shavings from multi metal machinery
Cleaning and periodic maintenance of the systems
Prodotti Correlati
UN PO' DI NOI
