FIPRO DET 668 is a liquid product based on caustic alkalis, ecological co-solvents, ionic and non-ionic surfactants, free from any chlorinated component.
FIPRO DET 668 was developed to replace the solvent-based products used in manual and lance cleaning.
FIPRO DET 668 is suitable for the removal of organic contaminants such as neat and emulsifiable oils. Compatible with substrates in CRS, steel, brass, copper. It could attack aluminum and galvanized substrates.
Straw yellow liquid
10.5 - 11
Usage and Applications
FIPRO DET 668 is used in aqueous solution at a concentration between 5% and 30%.
Lance or manual application. Rinsing required.
Control of bathing
The control of the bath is carried out by determining the free alkalinity as follows:
Take 10 ml of bath, put them in flask or beaker
Add 50 ml of demineralized water.
Add 5-6 drops of phenolphthalein and titrate with 0.1N sulfuric or hydrochloric acid.
The ml of acid consumed gives the bath score which for a 50g / l (5%) bath is about 5.5 points, while for a 30% bath it will be about 33 points.
Periodic cleaning of industrial floors
Removal of oils, pollutants, greases and shavings from multi metal machinery
Cleaning and periodic maintenance of the systems
Avoid knocks and improper handling of the packaging which can cause the product to leak. Protect from freezing, store away from heat sources, keep containers tightly closed
It does not damage the treated surfaces
Suitable for plastics
Removes oils, fats and deposits
Internal industrial machinery maintenance (forklifts, trolleys)
For industrial surfaces subject to frequent and heavy pollution
Cleaning of tanks and systems
Cleaning of artifacts and products in the metalworking sector