FIPROFLUX 365 has been formulated to protect materials such as monel and alpacca from thermal oxidation. It is used in soldering up to a temperature of 800 ° C.
FIPROFLUX 365 also allows you to weld without the aid of deoxidizing powders or pastes as it deoxidizes and promotes the flushing of the filler alloy.
One field of use is, for example, welding in the manufacture of glasses and the welding of silver jewelery.
FIPROFLUX 365 is a solvent-based, low-hazard, non-toxic, high protective power formulation.
Usage and Applications
Treat both pieces to be joined which must be perfectly degreased and dry.
Wet by immersion.
An imperfect degreasing is evident on the shiny details because the borate film is patchy; to eliminate the problem, simply immerse the pieces again and soak them for a few minutes.
After immersion, let it dry for a few minutes; it is possible to use a heat source to reduce the time.
Note: The formed white borate film is resistant to dry contact and degrades immediately on wet contact.
Attention: proceed with welding without interrupting and adding the solder only when the metal has reached the temperature.
Using these precautions, the union of the two parts is perfect and it is not necessary to use other deoxidizing powders or pastes.
Attention: refer to the safety data sheet. The product is highly flammable.
Avoid contact with the skin and inhalation of the product. Wear protective clothing and use respiratory protection. Keep away from sources of heat, flames and sparks.
Store in a tightly closed container in an airy, cool and dry place.
Surface protection from thermal oxides
Fillings with filler materials
Production of silver and alloy artifacts
Welding on copper-nickel alloys