top of page

FIPROPLUS 708

COMPLEMENTARY ADDITIVES FOR CHEMICAL PRODUCTS

Technical features

FIPROPLUS 708 is a slightly alkaline liquid detergent designed for degreasing ferrous material, aluminum, cast iron, steel in industry in general, with simultaneous protection from rust. It is a formulation free from nitrites and mineral oils. Suitable for immersion for tightness control.
Indicated for the removal of machining oils, workshop dirt from any type of metal surface.
Thanks to its formulation it does not leave saline deposits on the treated parts, it does not cause encrustations and sludge.
It can be used without rinsing in single-stage washing machines, while it can be used as a passivating rinse in multi-stage systems. The degreasing phase can be assisted by suitable surfactant additives.

Usage and Applications

FIPROPLUS 708 is easily soluble and does not cause foam formation, therefore it is also suitable as an additive for high pressures. Its solutions are stable in wide concentration ranges and even in extreme conditions of use (high temperatures and high water hardness above 30 ° F).

Parametro
Valore

Control of bathing

  • Take 10 ml of bath

  • Add a few drops of bromcresol green and titrate with acid (hydrochloric or sulfuric) 0.1 N until turning from blue to yellow

  • The ml of acid consumed represents the bath score.

  • A 5% bath has a score of about 13 ml.


Note: evaluate if the emulsifiable oil removed can affect the alkalinity of the bath, increasing it. If this phenomenon occurs, the consumption given by the alkalinity of the emulsifiable must be deducted from the value found.

Applicazione
Concentrazione

Alimentation

Maintain the concentration value established at the start-up of the plant by the Fiprokim technical service.
For each missing point, add 3.8 kg of product for every 1000 liters of bath.

Storage

  • Pickling Baths

  • Paint stripping

  • Process and waste water treatment

  • Alkaline degreasing baths

  • Phosphodegreasing baths

  • Interoperational

  • Ultrasonic washing machines

  • Treatment in spray booths

  • Additive of emulsions

Highlights

  • Liquid detergent

  • Degreasing of ferrous material, aluminum, cast iron, steel

  • Rust protection

Interessato?

Scrivici subito!

Privacy

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

Comunicazioni

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale)

Prodotti Correlati

FIPROPLUS 701

Additive based on cosolvents and surfactants used to increase the degreasing power of degreasing baths.

FIPROPLUS 709

Surface-activated acid liquid product for pH corrections in phosphating or washing baths.

FIPROPLUS 704

Alkaline neutralizing and antioxidant product, ideal for closing phosphating or acid pickling cycles.

FIPROPLUS 705

Alkaline product with neutralizing function, also ideal for final passivation in iron phosphating and zinc phosphating processes.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page