FIPROSTEEL 762 is a pickling agent for stainless steel, suitably formulated, sulfuric based and free from nitric acid, therefore both the bath and the consequent rinses are easily purified in traditional chemical-physical plants.
FIPROSTEEL 762 has been specially designed as a formulation for the formation and reinforcement of a
pickling bath. It performs the best pickling performances thanks to the combined action of our FIPROPLUS 711, product based on hydrogen peroxide.
Dilute FIPROSTEEL 762 with water in a 1: 1 ratio and add the product to the tank. To obtain an excellent deoxidation result, it is advisable to operate in multi-stage treatment plants to ensure excellent cleaning of the artifacts. Immerse the product to be pickled in the FIPROSTEEL 762 solution, the time for a good pickling varies from 20 minutes to over 2 hours depending on the type of welding and the temperature.
After the pickling operation, the parts must be perfectly rinsed with cold water. In order to guarantee an excellent final result, it will be necessary to degrease the product in advance if it is dirty with oil, grease or other impurities, for this type of application we recommend our. FIPROSTEEL 751 or FIPROSTEEL 770.
Control and Power
The controls of the bath are periodically carried out by determining the free acidity, total acidity, iron, hydrogen peroxide and, based on the values found, the ns. technical service will provide you with precise indications for a possible topping up.
Removal of thermal oxides (calamines) from raw materials or semi-finished products
Removal of processing oxides and oily residues or emulsions
Final cleaning of the finished product, with preservation of tolerances
Nitric acid free
Stainless steel pickling agent
Degreasing and cleaning of stainless steel
Stainless steel polishing
Liquid pickling agent based on phosphoric and nitric acid, with complex fluorides, cosolvents and surfactants. Not inhibited. Performs a degreasing and rusting action for stainless steel.
Nitric based pickling GEL, with complex and free fluorides, not inhibited. Suitable for pickling of stainless steel, flowered or satin-finished steel series 300, in particular for welding oxides.
UN PO' DI NOI
LA NOSTRA PRODUZIONE
Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.
La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.
PRODOTTI SU MISURA
Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.
Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.
LA NOSTRA AZIENDA
Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.