Technical features
It is used in the removal of powder coatings from frames, hooks and pieces with paint defects. Use on ferrous material and steel. Do not apply on aluminum and alloys and galvanized.
Usage and Applications
The product is used pure, by immersion or recirculation, and provides the best performance at temperatures between 50 and 60 ° C. The contact time depends on the type and quantity of paint to be removed, usually varies between 20 'and 120'.
Once the details have been treated, rinse thoroughly with water.
The tanks for using the FIPROSTRIP 288 must be made of steel, preferably stainless steel and be equipped with a closing lid to minimize losses due to evaporation.The product is used pure, immersion or recirculating, and provides the best performance at temperatures between 50 and 60 ° C. The contact time depends on the type and quantity of paint to be removed, usually varies between 20 'and 120'.
Once the details have been treated, rinse thoroughly with water.
The tanks for using the FIPROSTRIP 288 must be built in steel, preferably stainless steel and be equipped with a closing lid to minimize evaporation losses.
Physical-Chemical Data
Parametro | Valore |
|---|---|
Smell | Characteristic |
pH | ~12 |
Control of bathing
When the level of the paint stripping bath has dropped, top up to the desired level with FIPROSTRIP 1101.
After topping up, perform the alkalinity analyzes as shown below, in order to correctly balance the bath.
Take 1 milliliter of bath with a graduated pipette and put it in a flask - flask - becker
Add about 100 ml of demineralized water
Add 5-6 drops of phenolphthalein indicator
Homogenize the solution
Titrate with 0.1 N hydrochloric acid, stirring, until the color of the solution changes from pink to colorless.
The consumption of hydrochloric acid necessary for the color change represents the bathroom score
Applicazione | Concentrazione |
|---|
Alimentation
The minimum bath score should be 17 ml of 0.1 N hydrochloric acid.
If the score is lower, add FIPROSTRIP 299 ADD in a quantity equal to 20 kg of product for each point (ml) of acid missing compared to 17 and for 1000 liters of bath.
The value of a bath in formation is between 18 and 19 points.
Storage
Cleaning of painting plants
Cleaning of nozzles, tanks and painting systems in general
Recovery of hooks and supports
Recovery of defective parts
Application
Stripping of hooks and frames
Recovery of defective parts for subsequent repainting
Removal of protective paints
UN PO' DI NOI
