Technical features
FIPROSTRIP 260 is a general solvent based paint remover suitable for supports in light alloys, steel, copper.
It works in the complete absence of phenols or cresols and is particularly effective even on epoxy polyester, polyurethane and catalyzed epoxy powder paints.
Physical-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Colorless liquid |
Smell | Characteristic |
Density | ~1.235 Kg/l |
Usage and Applications
FIPROSTRIP 260 is used by immersion as it is. A good washing is required afterwards, which allows the total elimination of product and paint residues. If possible, however, stainless steel tanks (AISI 304 or AISI 316) are recommended.
The product is supplied ready to use; in order to avoid product leaks, it is advisable to use a tub with a lid.
Each time the tank is cleaned or when the lowering of the level requires it, the tank will be restored with the product as it is.
The treatment time depends on the type of thickness and cooking of the paints; in the worst conditions it may be necessary to dive even longer than 24 hours.
Applicazione | Concentrazione |
|---|
Control of bathing
The paint stripping tank should have a removable metal mesh in order to remove the detached paint at least once a week. The tank must also be removed periodically.
Storage
It is advisable to store indoors and at temperatures above 7 ° C away from heat sources.
Recommended use: 12 months from delivery date.
Highlights
Excellent dissolving capacity towards paints
Free of cresols and phenols
Possibility of filtering the bathrooms
Low harmfulness for the operator and the environment
Application
Stripping of hooks and frames
Recovery of defective parts for subsequent repainting
Removal of protective paints
Prodotti Correlati
UN PO' DI NOI
