top of page

FIPROSTRIP 284

FORMULATIONS SUITABLE FOR THE REMOVAL OF PAINTS ON ANY SURFACE AND MATERIAL

Technical features

FIPROSTRIP 284 is a newly developed paint stripper free from chlorinated solvents, to increase operator safety and environmental impact.
Compared to paint strippers based on chlorinated solvents, it has a much lower evaporation rate (about 3-5 times less) and is not suspected to be carcinogenic. It does not contain phenols.
The product can be used alone or in combination with the alkaline additive FIPROPLUS 949. The combination of paint stripper and additive makes the bath very performing, especially on powder paints.

Physical-Chemical Data

Parametro
Valore
Appearance
Clear yellowish liquid
Smell
Characteristic
Specific Weight
1.100 Kg/l
Rinseability
Good

Usage and Applications

Use the product as it is, by immersion, preferably by moving the bath, the temperature from room up to 50 ° C, completely immersing the pieces until the paint is removed. Then rinse with plenty of water.
It is advisable to periodically remove paint deposits that accumulate on the bottom.
The containment tanks must be constructed of steel, preferably stainless.
Possibly provide for a neutralization / degreasing tank, where any paint stripper residue not removed with the first rinse is removed from the pieces.

Applicazione
Concentrazione

Alimentation

Top-ups to maintain the volume of the paint stripping bath must always be carried out by adding FIPROSTRIP 284 and the FIPROPLUS 949 alkalinity corrector. Following these indications, it is possible to maintain a correct concentration of the solvent and alkaline component that is consumed during the stripping process.

Storage

  • Cleaning of painting plants

  • Cleaning of nozzles, tanks and painting systems in general

  • Recovery of hooks and supports

  • Recovery of defective parts

Highlights

  • Excellent dissolving capacity towards paints

  • Possibility of filtering the bathrooms

  • Low harmfulness for the operator and the environment

  • Slow evaporation, easy to use and long life

  • Excellent alternative to solvent products

Application

  • Stripping of hooks and frames

  • Recovery of defective parts for subsequent repainting

  • Removal of protective paints

Interessato?

Scrivici subito!

Privacy

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

Comunicazioni

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale)

Prodotti Correlati

FIPROSTRIP 282

Alcohol-based paint stripper with glycol, amine and low potash content. Suitable for the treatment of all metals.

FIPROSTRIP 287

Leading solvent, very efficient, based on strong alkalis and alcohols. Suitable for multimetal treatment, the baths can be filtered.

FIPROSTRIP 285

Ecological solvent, based on alcohols and glycols, formic acid and surfactants. Substitute for methylene chloride, with very low evaporation.

FIPROSTRIP 288

Leading solvent, very efficient, based on strong alkalis and alcohols. Suitable for multimetal treatment, the baths can be filtered.

FIPROSTRIP 286

Ecological solvent, based on alcohols and lactic acid. Version of the 285 less aggressive on metals, non-flammable.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page