top of page

FIPROSTRIP 286

FORMULATIONS SUITABLE FOR THE REMOVAL OF PAINTS ON ANY SURFACE AND MATERIAL

Technical features

FIPROSTRIP 286 is a new concept paint stripper, for use by immersion, free from chlorinated solvents, to increase operator safety and environmental impact.
Furthermore, compared to paint strippers based on chlorinated solvents, it has a much lower evaporation rate (about 3-5 times less) and is not suspected of being carcinogenic. It does not contain phenols. The product tends to detach the paint from the artifacts to be treated and not to dissolve it, so as to extend the life of the bathroom.

Physical-Chemical Data

Parametro
Valore
Appearance
Clear yellowish liquid
Smell
Pungent
pH
~1
Specific Weight
~1.12 Kg/l
Rinseability
Good

Usage and Applications

Use the product as it is, by immersion and at room temperature up to 50 ° C, completely immersing the pieces until the paint is detached. Then rinse with plenty of water.
It is advisable to periodically remove paint deposits that accumulate on the bottom.
The containment tanks must be made of stainless steel, preferably coated with plastic material, such as polyethylene, polypropylene, PVC.
Possibly provide for a neutralization / degreasing tank, where any paint stripper residue not removed with the first rinse is removed from the pieces.
Possibility of adding specific cover layers to limit evaporation and any vapors.
It is used in the immersion stripping of parts in iron, steel, copper, brass and aluminum.
Before using FIPROSTRIP 286, check the compatibility of the product with the substrate through preliminary tests. Suitable for removing all the main synthetic paints except polyurethane.
The working temperature can range from room temperature up to 50 ° C.

Applicazione
Concentrazione

Storage

In order to keep the characteristics of the product unaltered, it must be stored at temperatures between 7 ° C and 30 ° C.

Highlights

  • Excellent release capacity towards paints

  • Possibility of filtering the bathrooms

  • Low harmfulness for the operator and the environment

  • Slow evaporation, easy to use and long life

  • Ecological

Application

  • Stripping of hooks and frames

  • Recovery of defective parts for subsequent repainting

  • Removal of protective paints

Interessato?

Scrivici subito!

Privacy

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

Comunicazioni

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale)

Prodotti Correlati

FIPROSTRIP 282

Alcohol-based paint stripper with glycol, amine and low potash content. Suitable for the treatment of all metals.

FIPROSTRIP 287

Leading solvent, very efficient, based on strong alkalis and alcohols. Suitable for multimetal treatment, the baths can be filtered.

FIPROSTRIP 284

Ecological solvent, based on alcohols and glycol. Neutral pH product, to be added. Cold alternative to methylene chloride.

FIPROSTRIP 288

Leading solvent, very efficient, based on strong alkalis and alcohols. Suitable for multimetal treatment, the baths can be filtered.

FIPROSTRIP 285

Ecological solvent, based on alcohols and glycols, formic acid and surfactants. Substitute for methylene chloride, with very low evaporation.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page