LUBROFIP 8003 are mineral-based oils specifically formulated to prevent the phenomenon of "stick-slip", that is, the jamming or irregular translation, at low speed, of the slides on the guides of machine tools or operating machines.
They are available in ISO 32-68-100-150-220 grades
Features and Benefits
The LUBROFIP 8003 are able to ensure:
Excellent ability to modify the friction coefficient and to reduce the static friction factor
High greasiness and adhesiveness of the lubricating film on the guides and organs with sliding motion
Strong anti-wear power typical of the best hydraulic oils
good compatibility with emulsifiable fluids most
Commonly used for metal cutting with machine tools
Constancy of performance within a wide range of operating temperatures thanks to the high viscosity index
LUBROFIP 8003 therefore contain particular and specific additives modifying the sliding friction coefficient.
The use of LUBROFIP 8003, in addition to the main one for the lubrication of the guide and slide couplings of all machine tools, is indicated, with regard to the most fluid gradations, for all combined systems, with a single control unit: hydraulic controls and guides - slides.
They are also suitable for the lubrication of rolling bearings, boxed gears and gearboxes.
Method of use and storage
Store indoors if possible. If it is necessary to store outdoors, keep the drums in a horizontal position and cover them with a lid to prevent water infiltration. Do not store the packages at temperatures above 60 ° C or directly in the sun as it is good to keep them in places not subject to frost.