top of page

METALFIP 309

PRODUCTS DESIGNED FOR THE REMOVAL OF THE SURFACE LAYERS OF OXIDE AND CONTAMINANTS

Technical features

METALFIP 309 is a liquid phospho-pickling agent for the pre-painting treatment of iron, to be used where an energetic deoxidizing action combined with a phosphating action is required.
METALFIP 309 is a low foam product, therefore it is suitable for use in spray machines even at temperatures of 30-40 ° C. Effectively removes processing, protective and molding oils from metal surfaces while simultaneously developing a phosphate coating ideal for anchoring paints.
To increase the degreasing power and the duration of the solutions it is possible to add specific additives.

Physical-Chemical Data

Parametro
Valore
Appearance
Colorless liquid
Smell
Characteristic
Rinseability
Good
Biodegradable
Yes
Phosphates
Present
Foam formation
Low
Recommended thinner
Water
Behavior in hard water
Good

Usage and Applications

METALFIP 309 is usually used at concentrations between 50 and 150 g / l in volume and temperatures between 30 and 60 ° C. Where a strong detergent action is required, it is combined with the product FIPROPLUS 701.

Applicazione
Concentrazione

Control of solutions

Check and adjust the pH of the solution within the suggested range, then titrate according to the procedure:


  • Take 10 ml of the solution to be analyzed and place them in the glass beaker (or flask).

  • Add 20 ml of distilled water. Add 5-8 drops of FENOPHTHALEIN indicator. The solution will take on a COLORLESS color.

  • Titrate the solution obtained, keeping it stirred, with Sodium Hydrate 0.1 N until a PINK color is obtained. This change identifies the end of the titration.

Alimentation

  • Removal of thermal oxides (calamines) from raw materials or semi-finished products

  • Removal of processing oxides and oily residues or emulsions

  • Etching, pre-painting, pre-conversion treatments

  • Burnishing and satin finishing

  • Final cleaning of the finished product, with preservation of tolerances

Precautions

Avoid mixing the product with chlorinated substances.
The product has an acid action and prolonged direct contact with the eyes with the skin causes irritation. Therefore, handle the product wearing gloves and protective clothing.

Highlights

  • Hydrofluoric and nitric free

  • Excellent longevity of the baths

  • Pickling and phosphating action

Application

  • Pre-painting lines

  • Degreasing of oils and protective agents

  • Cleaning and degreasing of carbon steel and iron

  • Preconversion treatments (pre galvanic)

Interessato?

Scrivici subito!

Privacy

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

Comunicazioni

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale)

Prodotti Correlati

METALFIP 306

Decapante liquido per titanio.
Particolarmente indicato per il settore occhialeria, dove si devono garantire condizioni ottimali per l’intera montatura.

METALFIP 304

Blend of surfactated and inhibited strong acids, usable as brightener pickling agent for copper and brass.

METALFIP 301

Phosphoric based product, with organic acids, fluorides and nitrates, in gel. Pickling etching action for hot galvanized, ideal for pre-painting.

METALFIP 305

Product based on strong acids with fluorides, surfactated and inhibited. Ideal for iron pickling, it effectively removes red and black oxide.

METALFIP 303

Phosphodegreaser with organic acids and surfactants, can be used as a phosphodegreaser on ferrous materials or as an acid degreaser on stainless steel.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page