ULTRAFIP 604 is a caustic alkaline liquid product formulated for the degreasing of stainless steel and ferrous materials. It is indicated for the removal of oils, greasy substances and carbon residues.
Since the product is highly caustic, it causes surface aggression of non-ferrous alloys such as aluminum alloys or galvanized iron. It is therefore not recommended to use ULTRAFIP 604 on these types of alloys unless you want to obtain a slight attack on the surface (priming effect) for subsequent painting. The product must be rinsed thoroughly after degreasing.
The cleaning power of ULTRAFIP 604 is very high, thanks to its consistent package of low foam surfactants.
Usage and Applications
ULTRAFIP 604 is used in spray or immersion degreasing systems in the following operating conditions:
ULTRAFIP 604 concentration: 10 - 20 gr / lt
Immersion times: 3 - 6 '
Spray times 1 - 2 '
The particularity of the formulation of this product also makes it suitable for use with ultrasound.
Control of bathing
Take 10 ml of bath, put them in a flask (or beaker), add a few drops of METHYLORANGE indicator.
The solution has a YELLOW color. Titrate with 0.1 N HCl until the RED color appears.
The ml of 0.1 N hydrochloric acid consumed in the titration indicate the score and the total alkalinity of the ULTRAFIP 604 bath. To obtain the concentration of the bath in gr / l, the score must be multiplied by the fixed factor 1.50.
The bath should be checked periodically and maintained at the established concentration with regular additions. A continuous feeding by means of a dosing pump allows to obtain the best results.
For each missing point and for every 1000 liters of bath, add about 1.50 kg of ULTRAFIP 604.
Removal of whole and emulsifiable oils, fats and processing pastes
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Alkaline product, based on soaps, surfactants, sequestrants, alcohol and amines, free of mineral salts. Suitable for the removal of oils, greases, polishing pastes, tumbling, lapping, from stainless steel, aluminum, plastic. On brass and copper it also exerts a deoxidizing and whitening action. The surface remains hydrophobic.
Based on organic acids, with additives with surfactants. Suitable for removing oils and tumbling and polishing pastes used in eyewear and cutlery. For stainless steel, aluminum, plastic, brass, copper, galvanized material (after testing). On brass and copper it exerts a deoxidizing and brightening action.