Technical features
ULTRAFIP 607 degreaser is a product suitable for all metals. It is particularly suitable for the removal of polishing and lapping pastes, emulsifiable and whole oils, with the aid of ultrasound. ULTRAFIP 607 works in a practically neutral environment, therefore it is suitable for aluminum, brass and zamak.
The product avoids the too alkaline conditions typical of many degreasing processes. The absence of caustic soda eliminates the risks for the operators, just as the lack of ligninsulfonates avoids problems when purifying the drains. Foaming agent.
The product can be used as a highly degreasing additive for alkaline baths.
Usage and Applications
Concentration of use 3 - 10%
Working temperature 50 - 60 ° C
Roto, immersion, ultrasound systems.
Tank materials and equipment can be in carbon steel.
Parametro | Valore |
|---|
Control of bathing
The bath is titrated by determining the total alkalinity with verdebromocresol indicator (VBC) and 0.1 N hydrochloric or sulfuric acid titrating solution by operating as follows:
- take 10 ml of bath using a graduated pipette, add 4-5 drops of VBC indicator, 50 ml of demineralized water and titrate with 0.1 N acid until the solution changes from blue to yellow.
The number of ml of 0.1 N acid consumed in the titration multiplied by 6.9 gives the concentration in g / l of the bath.
ATTENTION: this determination is valid for an initial bath prepared with low hardness water. The factors affecting the score are:
a) Water alkalinity due to hardness and other salts. It should be predetermined, case by case, and subtracted from the consumption of the analysis.
b) Alkalinity from pastes and oils (in particular emulsifiable ones).
Applicazione | Concentrazione |
|---|
Storage
For the transport, storage, handling and discharge of wastewater, follow the indications and laws in force. For further information on the product consult the Safety Data Sheet.
Store the product in its original sealed packaging in a cool place away from frost and direct sunlight.
Prodotti Correlati
ULTRAFIP 605
Based on organic acids, with additives with surfactants. Suitable for removing oils and tumbling and polishing pastes used in eyewear and cutlery. For stainless steel, aluminum, plastic, brass, copper, galvanized material (after testing). On brass and copper it exerts a deoxidizing and brightening action.
ULTRAFIP 610
Alkaline product, based on soaps, surfactants, sequestrants, alcohol and amines, free of mineral salts. Suitable for the removal of oils, greases, polishing pastes, tumbling, lapping, from stainless steel, aluminum, plastic. On brass and copper it also exerts a deoxidizing and whitening action. The surface remains hydrophobic.
UN PO' DI NOI
