top of page

ULTRAFIP 610

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

ULTRAFIP 610 is a specific liquid degreaser for the removal of cleaning pastes from copper and brass items, ferrous materials and aluminum.
ULTRAFIP 610 finds application in galvanic, taps, eyewear and where it is necessary to remove cleaning pastes from metal parts.
Like all soap-based products, ULTRAFIP 610 leaves a hydrophobic film on the parts, which gives a slight passivation. This layer is easily removed with a normal alkaline degreaser.

Usage and Applications

ULTRAFIP 610 is used in immersion tanks, possibly with ultrasound.
Good degreasing results can already be obtained at temperatures close to 60 ° C, but a temperature between 75 and 90 ° C is recommended for the complete removal of polishing pastes. The tanks must be prepared at a concentration between 2 and 6% depending on the degree of pollution of the surface.

Parametro
Valore

Control of bathing

Take 10 ml of bath and place them in a flask or beaker. Add 50 ml of demineralized water and 5-6 drops of phenolphthalein. The solution will turn violet. Titrate with a graduated pipette and 0.1N acid until the violet disappears. The ml of acid consumed represents the bath score.
A 3% bath has a score of 4.2 points.

Applicazione
Concentrazione

Storage

The ULTRAFIP 610 product must be stored in its original packaging in ventilated and dry places, protect from frost, store away from heat sources.
Avoid knocks and improper handling of the packages which can cause the product to leak.

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interessato?

Scrivici subito!

Privacy

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

Comunicazioni

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale)

Prodotti Correlati

ULTRAFIP 601

Strongly alkaline soda-based product, with sequestering, dedusting, dispersing and anti-scaling agents. usable as a degreaser and as a dephosphating agent.

ULTRAFIP 605

Based on organic acids, with additives with surfactants. Suitable for removing oils and tumbling and polishing pastes used in eyewear and cutlery. For stainless steel, aluminum, plastic, brass, copper, galvanized material (after testing). On brass and copper it exerts a deoxidizing and brightening action.

ULTRAFIP 602

Caustic alkaline liquid product formulated for the degreasing of stainless steel and ferrous materials. Indicated for the removal of oils, greasy substances and carbon residues.

ULTRAFIP 607

Slightly alkaline product, based on soaps, surfactants and cosolvents. It is a totally organic product, free of soda, silicates, phosphates. Suitable for removing oils and lapping pastes from iron, brass, steel, extruded and die-cast aluminum, galvanized and zamak.

ULTRAFIP 604

Soda-based highly caustic liquid degreaser, with sequestering, dedusting, dispersing and anti-scaling agents. Similar to Ultrafip 601, it can be used as a degreaser and as a de-phosphating agent.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page