ULTRAFIP 638 is a liquid product, suitable for all ferrous metals and plastic materials (for zamak, galvanized and aluminum after a reactivity test that can be performed in our laboratory), specific for the removal of polishing pastes and heavy greases.
It is used with excellent results in electroplating for costume jewelery details and in the eyewear and cutlery industry.
Thanks to its particular formulation, free from boron, EDTA, chlorinated or petroleum solvents, it does not oxidize brass or copper, even with long periods of contact. The use of ultrasound enhances its cleaning power.
The product is totally free from any type of VOC.
Usage and Applications
ULTRAFIP 638 is used in immersion tanks, possibly with ultrasound.
Good degreasing results can already be obtained at temperatures of 50-60 ° C; for situations of heavy dirt (eg polishing pastes containing adhesives, very difficult to remove) it may be necessary to operate at temperatures up to 70-75 °C.
ULTRAFIP 638 is used in aqueous solution, by immersion, under the following operating conditions:
Bath temperature: 50 - 75 ° C
Treatment time: 3 - 30 minutes
Bath formation 10 - 60 g / l
Control of bathing
Using a graduated pipette, take 10 ml of bath cooled at room temperature and place them in a 250 ml beaker.
Add about 50 ml of demineralized water and 3-4 drops of phenolphthalein indicator.
The solution will turn pink.
Titrate with 0.1 N hydrochloric acid slowly until pink to colorless and read the ml of hydrochloric acid consumed, which represents the bath score.
A bath prepared at a concentration of 20 g / l will have a score of 7.7 ml.
For each missing point add 2.6 kg of product per 1000 kg of bath.
The Fiprokim Technical Service will provide, during the start-up phase of the plant, the optimal conditions of use, depending on the quality and quantity of foreign substances to be removed present on the surface of the material and the type of plant itself.
Removal of whole and emulsifiable oils, fats and processing pastes
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Acid product based on organophosphonic acids. It can be used as a softening pickling agent for welding oxides and as an acid additive to increase the dedusting and antiscaling effect of any type of bath (acid or alkaline).
Amine alkaline degreaser, primary amines, soaps, surfactants, sequestrants and cosolvents. Suitable for treatments on iron, steel, yellow alloys, die-cast aluminum and precious alloys.
UN PO' DI NOI
LA NOSTRA PRODUZIONE
Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.
La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.
PRODOTTI SU MISURA
Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.
Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.
LA NOSTRA AZIENDA
Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.