OILPROT

 

ANTIOXIDANT PROTECTIVE FLUIDS FOR METALS

Protective fluids for metals

The OILPROT line is made up of protective products for metals.

The products, which are solvent-based fluids, once the solvent has evaporated, leave a thin protective film in the pieces which guarantees resistance to oxidation for long periods too, even when transported by sea.

Efficiency

The appropriate additives allow the products of the OILPROT line to pass severe salt spray tests conducted at the Company's specialized laboratory.

Safety of use

The products of the OILPROT line contain neither substances present in the SVHC Candidate List nor carcinogenic substances.

 

Certifications

Our products are produced in full compliance with EU regulations.

 

Highlights

  • Antirust, antioxidant protective fluids for metals

Areas of intervention

  • Protection of metals against rust and oxidation during long-term storage and transport by sea.

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

 
 

Products of the Oilprot Line

  • OILPROT 08

    Non-flammable fluid that leaves a non-greasy protective film on the metal. Suitable for protection up to 6-8 months indoors.

     

  • OILPROT 16

     

    Non-flammable fluid that leaves a non-greasy protective film on the metal. Suitable for protection up to 12 months indoors. Suitable for sea transport protection.

  • OILPROT 20

     

    Quickly evaporable fluid which leaves an oily-waxy protective film on the metal. Suitable for protection up to 6-8 months indoors.

  • OILPROT 62

    Non-flammable fluid that leaves an oily-waxy protective film on the metal. Suitable for protection up to 6-8 months indoors.

A little bit of us

Our Production

All Fiprokim product lines are produced at our headquarters in Altavilla Vicentina. The wide range of mixers and special equipment allows Fiprokim to have considerable productive capacity.

Customized formulation

The company has a research and development laboratory made up of technicians specialized in the various areas. The study of technical solutions and the selection and control of raw materials are only the first fundamental step in the process of formulating an effective product.

Our Company

Fiprokim has more than twenty years of experience in research, formulation, production and marketing of chemical products for the treatment of metals and their detergents and cooling lubricants for the mechanical processing of metals.

Address

Fiprokim S.r.l.

Via dei Laghi, 50

36077 - Altavilla Vicentina (VI)  Italy

Contact

Opening Hours

Monday          8.00-13.00 e 14.00-18.00

Tuesday          8.00-13.00 e 14.00-18.00

Wednesday    8.00-13.00 e 14.00-18.00

Thursday        8.00-13.00 e 14.00-18.00

Friday             8.00-13.00 e 14.00-18.00

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.