FIPRO SG 1021

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

FIPRO SG 1021 is a highly alkaline powder degreaser used in electroplating for the electrolytic degreasing of surfaces in ferrous material, before their electrodeposition treatment.
FIPRO SG 1021 consists of a mixture of caustic alkalis, alkaline polyphosphates, sequestering and complexing agents.

Usage and Applications

FIPRO SG 1021 must be used in aqueous solution, under the following operating conditions:
Treatment time 1 '÷ 3' in the cathode phase - 30 "÷ 1 'in the anodic phase
Bath temperature 20 ÷ 45 ° C
Concentration of the bath 50 ÷ 100 g / l
Current density 5 ÷ 10 A / dm2
The optimal use values ​​will, however, be set by the Fiprokim Technical Service, case by case, during the start-up phase of the plant, according to the quality and quantity of foreign substances to be removed present on the surface of the material, of the type of material to be removed. treat and the plant itself.
BATH PREPARATION
To prepare 1000 l of bath, add 50 to 100 kg of FIPRO SG 1021 to the tank filled with water and brought to working temperature. Keep the solution under stirring until complete homogenization and check the bath.

Parametro
Valore

Control of bathing

The control of the bath is carried out by determining the total alkalinity, as described below:
take 10 ml of the bath using a calibrated pipette, place them in a conical flask, dilute them with distilled water and add a few drops of methyl orange indicator. Titrate with sulfuric (or hydrochloric) acid 1 N until the color changes from yellow to red.
The number of ml of 1 N sulfuric (or hydrochloric) acid consumed for the color change provides the total alkalinity of the bath.
A bath prepared at 50 g / l has a score of approximately 11.5, while one prepared at 100 g / l has a score of approximately 23.

Applicazione
Concentrazione

Alimentation

The bathroom must be checked at least once or twice a day and maintained at the concentration established at the time of start-up. If the score is lower than its initial value, add 4.3 kg of FIPRO SG 1021 to the bath for each missing point and for every 1000 l of bath.

Storage

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Highlights

  • Multi-material degreasers

  • Pre and Post processing treatments

  • Low environmental impact alternatives

  • Longevity and effectiveness

  • Periodic checks

  • Formulated, produced and controlled internally

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interessato?

Privacy

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

Comunicazioni

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale)

Scrivici subito!

Prodotti Correlati

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.