FIPRO SG 555 is a slightly alkaline product for spray or immersion degreasing of any type of metal with a simultaneous antioxidant effect.
Usage and Applications
It is used in cleaning cycles and as a degreasing additive in degreasing phosphating baths.
It is used in the metalworking sector for degreasing, in spray and immersion systems, of any type of metal.
Control of bathing
Take 20 ml of the bath, add 10 ml of demineralized water, plus a few drops of methyl orange and then titrate with HCl 0.1 N: the consumption of HCl 0.1 N multiplied by 6.5, gives the concentration in g / l of the product in the bath, which for a solution at 20 g / l is about 3.1. Therefore, for each missing point add 6.5 kg / m3.
Pre and Post processing treatments
Low environmental impact alternatives
Longevity and effectiveness
Formulated, produced and controlled internally
Removal of whole and emulsifiable oils, fats and processing pastes
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product