top of page

FIPRO SG 571

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

Slightly alkaline liquid degreaser formulated for the preliminary treatment of metals and aluminum in particular in pre-painting cycles.
To give the product a greater cleaning power against oily contamination, it is advisable to use a detergent condensate that our. Technical Service will be able to suggest according to the cycle and operating conditions (eg: our FIPROPLUS 701).

Usage and Applications

It can be used by spraying at a concentration of 10-20 g / l or by immersion at a concentration of 30-50 g / l.

Physical-Chemical Data

Parametro
Valore
Appearance
Clear yellowish liquid
Density
~1.335 Kg/lt
Smell
Characteristic
pH
~8.8

Control of bathing

The bath control is based on an acid-base titration according to the following method:

  • Take 10 ml of bath.

  • Add about 10 ml of distilled water and a few drops of methyl orange indicator.

  • Titrate with 0.1 N hydrochloric acid (0.1 N HCl) from yellow to persistent red color.

Let V1 be the volume in ml of acid used for the titration. For a fresh bath prepared at a concentration of 20 g / l  V1 = 5; this value constitutes the initial bathroom score.
The number of ml of HCl N / 10 consumed by the titration multiplied by 4 gives the concentration in g / l of the bath.

Applicazione
Concentrazione

Alimentation

For each missing point (V1) add approx. 4 Kg on a 1000 liter tank.

Highlights

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  •  Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interessato?

Scrivici subito!

Privacy

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

Comunicazioni

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale)

Prodotti Correlati

FIPRO SG 570

Strongly alkaline soda-based degreaser in powder form. It can be used with products from the Fiproplus line and is indicated for Pregalvanic treatments, as a rust remover for light oxides, as a de-phosphating and decarbonising agent.

FIPRO SG 578

Based on heptane isomers, low flammable, with an application range similar to Fipro SG 573.

FIPRO SG 573

Solvent-based degreaser, low flammable, with denatured isoparaffin. Formulated for the removal of oils and greases from metal surfaces, and similarly to Fipro SG 566, for cleaning electronic components, as well as paints and inks.

FIPRO SG 575

Alkaline degreaser based on potash, phosphates and silicates. Designed for the removal of emulsifiable and whole oils, as well as heavy fats. Easily rinsed.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page