
FIPROPLUS 708
COMPLEMENTARY ADDITIVES FOR CHEMICAL PRODUCTS
Technical features
FIPROPLUS 708 is a slightly alkaline liquid detergent designed for degreasing ferrous material, aluminum, cast iron, steel in industry in general, with simultaneous protection from rust. It is a formulation free from nitrites and mineral oils. Suitable for immersion for tightness control.
Indicated for the removal of machining oils, workshop dirt from any type of metal surface.
Thanks to its formulation it does not leave saline deposits on the treated parts, it does not cause encrustations and sludge.
It can be used without rinsing in single-stage washing machines, while it can be used as a passivating rinse in multi-stage systems. The degreasing phase can be assisted by suitable surfactant additives.
Physical-Chemical Data
Parametro | Valore |
---|
Usage and Applications
FIPROPLUS 708 is easily soluble and does not cause foam formation, therefore it is also suitable as an additive for high pressures. Its solutions are stable in wide concentration ranges and even in extreme conditions of use (high temperatures and high water hardness above 30 ° F).
Applicazione | Concentrazione |
---|
Control of bathing
Take 10 ml of bath
Add a few drops of bromcresol green and titrate with acid (hydrochloric or sulfuric) 0.1 N until turning from blue to yellow
The ml of acid consumed represents the bath score.
A 5% bath has a score of about 13 ml.
Note: evaluate if the emulsifiable oil removed can affect the alkalinity of the bath, increasing it. If this phenomenon occurs, the consumption given by the alkalinity of the emulsifiable must be deducted from the value found.
Alimentation
Pickling Baths
Paint stripping
Process and waste water treatment
Alkaline degreasing baths
Phosphodegreasing baths
Interoperational
Ultrasonic washing machines
Treatment in spray booths
Additive of emulsions
Storage
Avoid knocks and improper handling of the packaging which can cause the product to leak. Protect from frost, store away from heat sources, keep containers tightly closed.
Highlights
Liquid detergent
Degreasing of ferrous material, aluminum, cast iron, steel
Rust protection
Prodotti Correlati
UN PO' DI NOI

LA NOSTRA PRODUZIONE
Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.
La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

PRODOTTI SU MISURA
Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.
Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

LA NOSTRA AZIENDA
Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.