LUBROFIP 4804 is a soluble synthetic cooling lubricant free from nitrites, chlorine, boron and formaldehyde. Suitably mixed with Extreme Pressures additives, it is suitable for grinding, cutting and chip removal of ferrous and non-ferrous metals and yellow and cobalt-containing alloys.
Features and Benefits
Thanks to its particular formulation, LUBROFIP 4804 forms a clear and stable solution in water.
LUBROFIP 4804 is free from mineral oil, nitrites, sulfur, boron, chlorine and formaldehyde.
LUBROFIP 4804 contains EP additives (extreme pressure)
Long service life of the solution.
The clear solution offers considerable washing capacity and allows, in grinding, a greater cleaning of the grinding wheel.
In cutting operations it allows greater cleaning of the machined pieces and of the machine.
The excellent biostatic capabilities reduce the onset of bad odors caused by bacteria, fungi and algae.
Suitable for both single and centralized systems
Reduced environmental impact and reduced danger for the operator.
Also suitable for chip removal operations.
Paper Test 3%
Type of Emulsion
pH al 3%
8.7 - 9
Applications and Concentration of use
LUBROFIP 4804 is suitable for grinding operations of ferrous, non-ferrous metals and yellow alloys. Also suitable for use with materials containing cobalt.
Concentrations of use vary in consideration of the severity of the processing and of the processed material.
Method of use and storage
Before the first filling with LUBROFIP 4804, add the specific detergent FIPRO SG 1015 recommended by the technical service and continue working for at least 16 hours.
Empty the system, rinse and fill with new emulsion.
The emulsion can be prepared either manually or with an automatic mixer, adding the pure product to the water. Never vice versa. It is good practice to shake the product before use.
In order for the LUBROFIP 4804 emulsions to retain their biostatic and antioxidant properties, it is essential not to go below the minimum recommended concentration.
If necessary, it is possible to intervene with the auxiliary products recommended by the technical service.
Keep the emulsion tank clean. In the event of the presence of oil from the guides on the surface, use an oil separator to allow the aeration of the emulsion.
Do not store the product for more than six months. Protect from freezing, keep the packages closed and away from heat sources. Avoid storage in direct sunlight (storage temperatures between + 5 ° C and + 40 ° C).
The Fiprokim technical service is available for advice and presence at your company.
Soluble coolants for grinding and metalworking
Safe for the operator
Multimetal and specific products
Usable for grinding and cutting of all metals
Turning, milling, grinding, cutting
CNC machines, grinders, single and multi-spindle machines, lathes, cutters