top of page

ULTRAFIP 627

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

ULTRAFIP 627 is a liquid product, suitable for all metals, specific for the removal of polishing pastes and heavy greases.
It is used with excellent results in electroplating for costume jewelery details and in the eyewear and cutlery industry.
Thanks to its particular formulation, free from boron, EDTA, chlorinated or petroleum solvents, it does not oxidize brass or copper, even with long periods of contact. The use of ultrasound enhances its cleaning power.

Usage and Applications

ULTRAFIP 627 is used in immersion tanks, possibly with ultrasound.
Good degreasing results can already be obtained at temperatures of 60-65 ° C; for situations of heavy dirt
(eg polishing pastes containing adhesives, very difficult to remove) it may be necessary to operate a
temperatures up to 75 and 80 ° C.
ULTRAFIP 627 is used in aqueous solution, by immersion, under the following operating conditions:
Bath temperature: 50 - 80 ° C
Treatment time: 3 - 30 minutes
Bath formation 10 - 60 g / l

Parametro
Valore

Control of bathing

Using a graduated pipette, take 20 ml of the bath cooled at room temperature and place them in a 250 ml beaker.
Add about 50 ml of demineralized water and 3-4 drops of phenolphthalein indicator.
The solution will turn pink.
Titrate with 0.1 N hydrochloric acid slowly until pink to colorless and read the ml of hydrochloric acid
consumed, which represent the bathroom score.
A bath prepared at a concentration of 20 g / l will have a score of 8 ml.

Applicazione
Concentrazione

Storage

For each missing point add 2.5 kg of product per 1000 kg of bath.

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interessato?

Scrivici subito!

Privacy

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

Comunicazioni

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale)

Prodotti Correlati

ULTRAFIP 610

Alkaline product, based on soaps, surfactants, sequestrants, alcohol and amines, free of mineral salts. Suitable for the removal of oils, greases, polishing pastes, tumbling, lapping, from stainless steel, aluminum, plastic. On brass and copper it also exerts a deoxidizing and whitening action. The surface remains hydrophobic.

ULTRAFIP 620

Alkaline product based on potash, easy to rinse. Additivated with dedusting, anti-scaling and dispersing agents. Suitable for iron and plastic.

ULTRAFIP 612

Weakly alkaline product consisting of non-ionic and anionic surfactants, sequestrants, secondary amines and cosolvents. Suitable for the removal of pastes and oils from all metals, even in goldsmith's for details in gold and precious alloys.

ULTRAFIP 625

Potash-based alkaline degreaser, surfactant with dispersants and dedusting agents. Suitable for oils and pastes, it has been designed for eyewear and acetal. Also suitable for treatments on iron, steel, plastic.

ULTRAFIP 619

Caustic product based on potash, with dedusting agents, antiscalants, dispersants and surfactants. Easy to rinse, it is suitable for removing pastes and oils from iron, steel and plastic.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page