top of page

FIPROPHOS 526

PRODUCTS FOR SURFACE CONVERSION AND PRE-PAINTING

Technical features

FIPROPHOS 526 is a liquid phospho-degreaser suitable for the pre-painting treatment of ferrous material, aluminum and zinc.
The surfactants contained in the product are non-foaming in nature. This allows the product to work even at low temperatures without creating problems of excessive foaming.
The FIPROPHOS 526 product effectively removes machining and molding oils and other greasy contaminants from metal surfaces, giving the treated surface a phosphate conversion weighing 0.3-0.6 g / m2.
Thanks to its formulation, it can be used where an energetic deoxidizing action combined with a phosphating action is required.
To increase the degreasing power and the duration of the solutions it is possible to add specific additives, such as for example. our FIPROPLUS 701 degreasing additive.

Physical-Chemical Data

Parametro
Valore
Appearance
Amber liquid
pH
4 - 5
Specific Weight
~1.220 Kg/l

Usage and Applications

Bathe preparation:


  • Fill the tub with clean water

  • Activate the system and the heating

  • Add the quantity of product necessary to reach the desired concentration (possibly in the suction area of the pumps).

  • Run the system for 5-10 'to allow the bath to homogenize

Applicazione
Concentrazione

Control of bathing

  • Take 10 ml of the bath to be analyzed and place them in the flask

  • Add 5-6 drops of phenolphthalein indicator

  • Add 100ml of distilled water


Titrate with sodium hydroxide N / 10 until a persistent pink color of the solution is obtained.
The ml of Sodium Hydrate N / 10 consumed in the titration indicate the total acidity of the FIPROPHOS 526 bath.

Alimentation

To obtain the concentration in gr / lt multiply the value obtained by the fixed number “3.5”.
Then bring the concentration to the required value, adding 3.5 kg of product per 1000 Lt. of bath for each missing point.
For a solution at 10 g / l the score is approx. 2.9 ml of sodium hydroxide 0.1 N.

Storage

FIPROPHOS 526 is an acidic product, therefore avoid contact with eyes and skin.
It is recommended to handle the product with rubber gloves and protective clothing.

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPROPHOS 520

Light layer multimetal phosphodegreaser with anticorrosive, immersion or with pressure lance. Surfactant, foaming.

FIPROPHOS 529

Multimetal phosphodegreaser with corrosion inhibitors for line stoppages. To be used by spraying, even at low temperatures.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page