top of page

FIPROPLUS 720

COMPLEMENTARY ADDITIVES FOR CHEMICAL PRODUCTS

Technical features

FIPROPLUS 720 is a slightly alkaline liquid detergent designed for degreasing ferrous material, aluminum, cast iron, steel in industry in general, with simultaneous protection from rust.

Physical-Chemical Data

Parametro
Valore

Usage and Applications

It is a formulation free from nitrites and mineral oils. Suitable for immersion for tightness control.
Indicated for the removal of machining oils, workshop dirt from any type of metal surface.
Thanks to its formulation it does not leave saline deposits on the treated parts, it does not cause encrustations and sludge.
It can be used without rinsing in single-stage washing machines, while it can be used as a passivating rinse in multi-stage systems. The degreasing phase can be assisted by surfactant additives, with the aim of increasing detergency and de-emulsifying the oil in the tank, allowing a better conduct of the process. The additives are identified in Fiproplus 924, 928, Fiproplus 701, Fiproplus 912 or 916.
FIPROPLUS 720 is easily soluble and does not cause foaming.

Applicazione
Concentrazione

Control of bathing

Take 10 ml of bath, add a few drops of bromocresol green and titrate with 0.1 N acid (hydrochloric or sulfuric) until it turns from blue to yellow.
The ml of acid consumed represents the bath score.
A 5% bath has a score of approximately 6.5ml
Note: evaluate if the emulsifiable oil removed can affect the alkalinity of the bath, increasing it. If this phenomenon occurs, the consumption given by the alkalinity of the emulsifiable must be deducted from the value found.

Alimentation

  • Pickling Baths

  • Paint stripping

  • Process and waste water treatment

  • Alkaline degreasing baths

  • Phosphodegreasing baths

  • Interoperational

  • Ultrasonic washing machines

  • Treatment in spray booths

  • Additive of emulsions

Storage

Avoid knocks and improper handling of the packaging which can cause the product to leak. Protect from frost, store away from heat sources, keep containers tightly closed.

Highlights

  • Free from nitrites and mineral oils

  • Suitable for removing processing oils

  • Multimetal

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPROPLUS 725

Solvent and surfactant based additive used to increase the degreasing power of acidic cleaning solutions or pickling solutions for stainless steel.

FIPROPLUS 729

Fluorine-based powder product, to be added in phospho-degreasing baths to correct the fluoride content.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page