top of page

FIPROPLUS 900

COMPLEMENTARY ADDITIVES FOR CHEMICAL PRODUCTS

Technical features

FIPROPLUS 900 is an additive to increase the degreasing power of alkaline or acid detergent solutions. It has a very high wetting and solvent power against pollutants that are difficult to eliminate and different types of oils.
FIPROPLUS 900 contains within it elements that break the emulsion, that is, they separate the aqueous phase from the oily phase. This means that once the product has been degreased, the oily phase is separated (usually brought to the surface) and does not interfere with the subsequent washing.
Inside, this additive contains particular surfactants that stop the formation of foam.
Thanks to its formulation, FIPROPLUS 900 is therefore suitable for working even at low temperatures.

Usage and Applications

  • It is used in cleaning cycles and in spray phosphodegreasing baths.

  • It is used for occasional additions at concentrations between 0.2 and 1 g / l.

Parametro
Valore

Control and Alimentation

It is based on the visual verification of the maintenance of a continuous veil of washing water on the treated pieces. If the effect of the water film is discontinuous (water-break), the use of FIPROPLUS 900 must be reinforced up to a maximum of 2 g / l.

Applicazione
Concentrazione

Storage

Store in covered areas, away from frost and sunlight.

Highlights

  • Additive for degreasing increase

  • High wetting power

  • Anti-foam surfactants

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPROPLUS 901

Additvo to increase the disintegrating power of hot alkaline paint strippers, ideal for FIPROSTRIP AC 273 and FIPROSTRIP 282.

FIPROPLUS 905

Neutralizing and antioxidant product indicated for phosphating, acid pickling or degreasing of ferrous material. Also for testing radiators and tanks.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page