top of page

FIPROSTRIP 254

FORMULATIONS SUITABLE FOR THE REMOVAL OF PAINTS ON ANY SURFACE AND MATERIAL

Technical features

FIPROSTRIP 254 is a liquid paint stripper suitable for the treatment in immersion and hot recirculation systems of parts in iron, aluminum, zinc and painted alloys.
Its balanced formulation combines a high disintegrating power with an ability to dissolve paints.
FIPROSTRIP 254 is suitable for removing different types of paint, including: powder paints (polyester, epoxy, polyurethane), liquid paints (water or solvent).

Physical-Chemical Data

Parametro
Valore
Appearance
Straw yellow liquid
Smell
Characteristic
pH
~13
Solubility in Water
Miscible

Usage and Applications

The product is used pure, in immersion or recirculation environments, at a variable temperature between 50-80 ° C. The contact time depends on the quality of the paint to be removed, it usually varies between 30 'and 120' although in some cases it can be up to 24 hours.

Applicazione
Concentrazione

Alimentation

The bath must be checked periodically and maintained in the concentration established experimentally at the time of commissioning. If necessary, the alkalinity values ​​can be adjusted to measure with specific additives from the Fiproplus and Alcafip lines. A bathroom at the beginning of the work has a score of about 7 points. The score is determined through the free alkalinity: take 10 ml of homogeneous bath, add 100 ml of demi water, add 5-6 drops of phenolphthalein (colored pink violet) and titrate with 1N acid until the violet color disappears. The 1N acid consumption represents the bath score.

Storage

Avoid knocks and improper handling that can cause product leaks.
Protect from freezing, store away from heat sources, keep containers tightly closed.
For more detailed information on the handling of the product and the relative disposal of the solutions, please refer to the safety data sheet.

Highlights

  • Excellent dissolving capacity towards paints

  • Possibility of filtering the bathrooms

  • Low harmfulness for the operator and the environment

  • Slow evaporation, easy to use and long life

  • Excellent alternative to solvent products

Application

  • Stripping of hooks and frames

  • Recovery of defective parts for subsequent repainting

  • Removal of protective paints

Are you interested?

Write to us and we'll get back to you as soon as possible!

Privacy

I hereby declare that I am sixteen years of age or older, and if under sixteen, that I have been authorised by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

Communications

I consent to the processing of my personal data. For the forwarding of the newsletter, communications via telephone (sms, WhatsApp, voice call)

Related Products

FIPROSTRIP 251

Alkaline amine based paint stripper with pyrrolidone. For treatments on surfaces and multimetal components, it must be used hot, and can be used with a so-called coverlayer to prevent evaporation.

FIPROSTRIP AC 252

Alkaline product based on strong alkalis and alcohols, mainly suitable for iron, to be used hot. Indicated for the removal of polymeric films, transparent, lacquered and pigmented paints from glasses, metal profiles, tanks and ferrous products in general.

FIPROSTRIP 255

Multimetal paint stripper with methylene and formic chloride, surfactated to ensure greater effectiveness.

FIPROSTRIP 259

Multimetal paint stripper based on methylene chloride and lactic acid, surfactant. the reduced acidity allows it to be used even on surfaces typically attacked by the formic.

A LITTLE ABOUT US

OUR PRODUCTION

All Fiprokim lines are produced at our facility in Altavilla Vicentina.
The wide range of mixers and equipment allows us to have considerable production power.
Fusti di stoccaggio
FREZZE 4-mod.jpg

Customised products

Fiprokim has a research and development laboratory staffed by technicians specialised in various fields.

The study of technical solutions, the selection and control of raw materials are part of the process of creating an effective product.

OUR COMPANY

Fiprokim has more than 20 years' experience in the research, formulation, production and marketing of chemical products for the treatment of metals  and their cleaning and of coolants for mechanical metalworking.

immagine azienda ridimensionata.jpg
bottom of page