Technical features
FIPRO AK 955 is a product that mainly carries out an anticorrosive action to prevent the formation of "red water" in the water network and, in addition, a good anti-scale action.
Physical-Chemical Data
Parametro | Valore |
|---|
Usage and Applications
FIPRO AK 955 is suitable for drinking water with low total hardness (<140 ppm CaCO3) and with free carbon dioxide present.
FIPRO AK 955 is a liquid product based on a particular mixture of alkaline silicates and phosphates prepared with raw materials that comply with UNI-EN standards relating to chemicals that can be used for conditioning water intended for human consumption.
Applicazione | Concentrazione |
|---|
Alimentation
The dosage of FIPRO AK 955 ranges from 60 to 120 gr / m3 of water. Before starting the treatment, it is recommended to check the local regulations relating to drinking water. Contribution of silica and phosphates from FIPRO AK 955:
1 mg / l FIPRO AK 955 gives: 0.15 mg / l SiO2
and <0.02 mg / l P2O5
The concentration of the product in the water is determined with a colorimetric analytical method available from Fiprokim.
The product must be dosed as it is continuously with suitable dosing systems, based on the water flow rate.
Storage
The product is available in different packaging.
Store the original closed packages in dry and ventilated places.
Avoid storage temperatures below + 5 ° C and not above 45 ° C.
Slight differences in the appearance of the product do not compromise its efficiency and operational performance.
Application
Tube circuits, heat exchangers, evaporators, boilers
Water conditioning
Prevention of inorganic and organic encrustations and sediments in open and closed circuits
Prevention and arrest of corrosive phenomena localized in circuits and pipes
Salinity and hardness regulation
Elimination of bacterial flora and prevention,
Sanitation
Circuit cleaning and maintenance
Prodotti Correlati
UN PO' DI NOI
