top of page

FIPROPLUS 932

COMPLEMENTARY ADDITIVES FOR CHEMICAL PRODUCTS

Technical features

FIPROPLUS 932 is a neutralizing product to be used after acid treatment or after alkaline degreasing and has a significant antioxidant action in the passivation phase. The use of this formulation is recommended for closing cycles of phosphating, acid pickling or degreasing of particularly delicate ferrous material. Excellent passivating agent for iron and cast iron products. Composed of alkanolamines and organic sequestrants, it can be used both as a final passivator and as an interoperational allowing for indoor storage.

Physical-Chemical Data

Parametro
Valore
Appearance
Straw yellow liquid
Smell
Bland
Density
1.070 Kg/l
pH
10

Usage and Applications

FIPROPLUS 932 can be used both by spraying and by immersion, using systems built in carbon steel or stainless steel.

FIPROPLUS 932 is diluted in water (preferably demineralized for final passivation) at the concentration defined in collaboration with the Fiprokim technical service.
Indicatively, according to the needs, put from 5 to 50 Kg of FIPROPLUS 932 every 1000 liters of bath to be formed, using preheated water where required. Homogenize with the recirculating pumps for at least 15 minutes. Then proceed to the analytical control of the bath.

Applicazione
Concentrazione

Control of bathing

The bath control is performed by chemical titration according to the following method:
Exactly 10 ml of bath are taken with a calibrated pipette, diluted with 20-30 ml of demineralized water and added to 4-5 drops of bromcresol green indicator solution (VBC).
The solution will turn blue and titrate with 0.1N hydrochloric or sulfuric acid until it changes from blue to yellow.
The n ° of ml of acid used for the color change will correspond to the bath score.
Below are the scores in relation to concentration.



     POINT                CONCENTRATION %
         3,3                                    1
         6,5                                   2
         9,7                                   3 
        13,0                                  4
        16,2                                  5

Alimentation

Based on the percentage obtained, feed the difference from the default value with the Fiprokim technical service.
Automatic: maintenance of the pH value set with the panel-probe.

Storage

Store the product away from direct sunlight and heat sources. The product cannot stand freezing: store at temperatures above 5 ° C.

Highlights

  • Neutralizing product

  • Excellent passivating agent for iron and cast iron

  • Can be used as an interoperational passivating agent for closed storage

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPROPLUS 930

Neutralizing product and antirust inhibitor, free of boron, nitrites and amines. Slightly alkaline passivating agent for the temporary protection of ferrous material.

FIPROPLUS 934

Interoperational alkaline liquid detergent designed for degreasing ferrous material, with simultaneous protection against rust. Formulated free from nitrites and mineral oils.

FIPROPLUS 931

Additive with a strong wetting and solvent power, which can be used to increase the degreasing power of alkaline or acid detergent solutions.

FIPROPLUS 935

Neutralizing product to be used after acid treatment or after alkaline degreasing, at the end of phosphating, acid pickling or degreasing cycles.

FIPROPLUS 933

Interoperational alkaline liquid detergent designed for degreasing ferrous material, with simultaneous protection against rust. Formulated free from nitrites and mineral oils.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page