FIPRODISK 102

FIPRODISK 102 is used in a 5 to 20% aqueous solution. At this concentration it can be kept in circulation for at least 4-5 hours for cleaning.
The concentration of use depends on the amount of carbonate to be dissolved.
Theoretically 1 kg. of FIPRODISK 102 is able to eliminate 0.55 kg. of calcium carbonate at 20 ° C.
To descale injection pipes dirty with cement, proceed as follows. Prepare approx. In an acid-resistant container. 200 liters of 20% solution of FIPRODISK 102. Create a circuit divided in such a way as to be able to recirculate the descaling solution (the FIPRODISK 102 solution introduced into the pipes to be descaled returns to the container from which it is returned to the circuit through the delivery pump) . The duration of the treatment depends on the thickness of the encrustations and the speed of the descaling liquid. In general, the time required is between 30 and 60 '.
After the treatment, rinse thoroughly with disposable water. Before being discharged, the descaling solution must be neutralized with soda and lime up to pH 7-8.
At the end of the descaling treatment, the circuit must be emptied and rinsed.
After the rinsing phase, an appropriate passivator must be used to neutralize and form a protective film on the metal wall. If necessary, the quantity of FIPRODISK 102 present in the solution can be determined by titration.