top of page

FIPRODISK 104

SOLUTIONS FOR MAINTENANCE AND CLEANING OF MACHINES AND PLANTS

Technical features

FIPRODISK 104 is a product based on inorganic acids and particular corrosion inhibitors, suitable for dissolving inorganic calcareous deposits in pipes or heat exchangers.
FIPRODISK 104 cleans the walls of these deposits, without attacking the metal part and is particularly suitable for systems without particular corrosion problems.

Physical-Chemical Data

Parametro
Valore
Appearance
Straw yellow liquid
Smell
Pungent
pH
~1
Specific Weight
1.230 Kg/l
Foam formation
Low

Usage and Applications

FIPRODISK 104 is able to dissolve limestone deposits inside the pipes.
The particular corrosion inhibitors contained protect the metal surfaces during the cleaning phase, avoiding corrosion phenomena.

FIPRODISK 104 is used in a 5 to 20% aqueous solution.
At this concentration it can be kept in circulation for at least 6-7 hours for cleaning.
The concentration of use depends on the amount of carbonate to be dissolved.
Theoretically 1 kg. of FIPRODISK 104 is able to eliminate 0.45 kg. of calcium carbonate at 20 ° C.

To descale injection pipes dirty with cement, proceed as follows:

  • Prepare approx. In an acid-resistant container. 200 liters of 20% solution of FIPRODISK 104

  • Create a circuit divided in such a way as to be able to recirculate the descaling solution (the FIPRODISK 104 solution introduced into the pipes to be descaled returns to the container from which it is returned to the circuit through the delivery pump)


The duration of the treatment depends on the thickness of the encrustations and the speed of the descaling liquid. In general, the time required is between 40 and 70 '.
After the treatment, rinse thoroughly with disposable water.
Before being discharged, the descaling solution must be neutralized with soda and lime up to pH 7-8.
At the end of the descaling treatment, the circuit must be emptied and rinsed.

After the rinsing phase, an appropriate passivator must be used to neutralize and form a protective film on the metal wall. If necessary, the quantity of FIPRODISK 104 present in the solution can be determined by titration.

Applicazione
Concentrazione

Control of bathing

  • Take 10 ml of the solution to be titrated and place them in the flask

  • Add 5-6 drops of methyl orange indicator. The solution will turn a deep red color.

  • Titrate with 1 N sodium hydrate until a persistent yellow color of the solution is obtained.


To obtain the concentration in gr / lt multiply the value obtained by the fixed number “21”.

Highlights

  • Periodic cleaning of tanks and industrial plants

  • Removal of calcareous, saline, phosphatic and cement deposits

  • Descaling of heat exchangers and pipes

Application

  • Degreasing tanks and lines

  • Circulating water circuits (heat exchangers, boilers, etc.)

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPRODISK 101

Formulated based on chlorine, with anticorrosive and urea. It can be used as a pickling agent for iron, descaling agent for plants and exchangers (not in yellow alloy), removal of limestone, saline, phosphatic and cement deposits.

FIPRODISK 109

Phosphoric based, with organic acids and enriched with dispersants, dedusting agents, complexing agents, surfactants and cosolvents. Suitable for the descaling of phosphodegreasing tunnels even without rinsing or neutralization, and for the degreasing of stainless steel, copper, brass.

FIPRODISK 102

Highly inhibited chlorine-based product with additive with anticorrosion. Pickling agent for iron, descaling agent for systems and exchangers (not in yellow alloy), removal of limestone, saline, phosphatic and cement deposits.

FIPRODISK 103

Phosphoric based formulation, with additives with inhibitors and anticorrosives. It can be used as a light pickling agent for stainless steel, and etching, pickling and descaling agent for galvanized. Can also be used as a degreaser for aluminum.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page