top of page

FIPRO SG 1012

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

FIPRO SG 1012 is an interoperational alkaline degreaser used for washing and temporary anticorrosive protection of the processed material. Designed for the removal of shavings and machining oils from surfaces in ferrous, aluminum, galvanized, copper and yellow alloys in spray treatment plants.
FIPRO SG 1012 is a formulation based on soaps, non-ionic and cationic surfactants and amines, free from chlorides.

Usage and Applications

The product can be used as a protective interoperable degreaser in single-stage and multi-stage spray systems. The main use of FIPRO SG 1012 is in spray treatment plants or where there is the possibility of combining a mechanical action with a controlled foam washing solution.
FIPRO SG 1012 allows you to combine a slowed foam effect with de-emulsifying and sanitizing properties.
Concentration FIPRO SG 1012: 2 - 6%
Solution temperature: 40 - 60 ° C

Parametro
Valore

Control of bathing

Concentration control is performed by titration of the total alkalinity present in the solution, using the following method:


  • Take 10 ml of washing solution and place them in a flask

  • Add about 6-8 drops of Bromine Cresol Green Indicator

  • Titrate with 0.1 N hydrochloric acid until turning from blue to yellow

  • The ml of 0.1 N hydrochloric acid used represent the total alkalinity value.

Applicazione
Concentrazione

Storage

For the handling and storage of the product it is recommended to respect the prescriptions of the relative safety data sheet. If possible, use covered warehouses avoiding exposing the product to heat sources or temperatures below 5 ° C.

Highlights

  • Multi-material degreasers

  • Pre and Post processing treatments

  • Low environmental impact alternatives

  • Longevity and effectiveness

  • Periodic checks

  • Formulated, produced and controlled internally

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  •  Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Are you interested?

Write to us and we'll get back to you as soon as possible!

Privacy

I hereby declare that I am sixteen years of age or older, and if under sixteen, that I have been authorised by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

Communications

I consent to the processing of my personal data. For the forwarding of the newsletter, communications via telephone (sms, WhatsApp, voice call)

Related Products

FIPRO SG 1021

Product in alkaline powder, polyphosphates, silicates, carbonates and gluconates. Without surfactants, it is suitable for electroplating, removal of oils and pastes.

FIPRO SG 1025

Alkaline blend of polyphosphates, surfactants and silicates. Alkaline degreaser suitable for cleaning after molding, cutting, or deformation. Removes dirt and grease, even pigmented, fatty acids from drawing operations. Can be used with hard water.

FIPRO SG 1023

Alkaline degreaser based on sequestrants, polyphosphates, controlled foam surfactants and silicates. Also suitable at low temperatures for spray or immersion degreasing (with and without ultrasound) of iron, steel, zinc and alloys, extruded and die-cast aluminum before phosphating.

FIPRO SG 1024

Formulated based on carbonates, organic protectants and sequestering agents. Application range similar to Fipro SG 1023.

A LITTLE ABOUT US

OUR PRODUCTION

All Fiprokim lines are produced at our facility in Altavilla Vicentina.
The wide range of mixers and equipment allows us to have considerable production power.
Fusti di stoccaggio
FREZZE 4-mod.jpg

Customised products

Fiprokim has a research and development laboratory staffed by technicians specialised in various fields.

The study of technical solutions, the selection and control of raw materials are part of the process of creating an effective product.

OUR COMPANY

Fiprokim has more than 20 years' experience in the research, formulation, production and marketing of chemical products for the treatment of metals  and their cleaning and of coolants for mechanical metalworking.

immagine azienda ridimensionata.jpg
bottom of page