top of page

FIPRO SG 1023

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

FIPRO SG 1023 is an alkaline liquid formulation used for spray or immersion degreasing (with and without ultrasounds) of iron, steel, zinc and alloys, extruded and die-cast aluminum before their chemical conversion treatment such as phosphating. The product is specifically designed to give a strong emollient action on any type of dirt or encrustation already at room temperature.
FIPRO SG 1023 consists of an aqueous solution of sequestering agents, polyphosphates, controlled foam surfactants and silicates.

Usage and Applications

FIPRO SG 1023 must be used, by spray or immersion, in aqueous solution, under the following operating conditions:
Treatment time 3 '÷ 10'
Bath temperature 40 ÷ 80 ° C
Concentration 2 ÷ 6%
The optimal use values ​​will, however, be set by the Fiprokim Technical Service, case by case, at the time of the plant start-up, according to the quality and quantity of foreign substances to be removed present on the surface of the material and the type of plant. same.

Parametro
Valore

Control of bathing

The bath is checked by periodically determining the free alkalinity.
Take 10 ml of bath and place them in a flask. Add 50 ml of demineralized water. Add phenolphthalein indicator hydroalcoholic solution. The solution will turn violet. Titrate with 0.1N acid until the pink color disappears. The ml of acid consumed represents the bath score.
A bath prepared at 20 g / l has a score of 3.7 ml.

Applicazione
Concentrazione

Alimentation

The toilet must be checked periodically (at least once or twice a day) and maintained at the concentration established at the time of its start-up. For each missing point, for every 1000 liters of bath, add 5.5 kg of product.

Storage

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Highlights

  • Multi-material degreasers

  • Pre and Post processing treatments

  • Low environmental impact alternatives

  • Longevity and effectiveness

  • Periodic checks

  • Formulated, produced and controlled internally

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPRO SG 1012

Interoperational amine based surfactant, anticrustants and soaps. Used for the removal of emulsifiable oil from painted aluminum pump bodies. performs a de-emulsifying function with a sanitizing effect. For single-stage and multi-stage, even no rinse.

FIPRO SG 1025

Alkaline blend of polyphosphates, surfactants and silicates. Alkaline degreaser suitable for cleaning after molding, cutting, or deformation. Removes dirt and grease, even pigmented, fatty acids from drawing operations. Can be used with hard water.

FIPRO SG 1021

Product in alkaline powder, polyphosphates, silicates, carbonates and gluconates. Without surfactants, it is suitable for electroplating, removal of oils and pastes.

FIPRO SG 1024

Formulated based on carbonates, organic protectants and sequestering agents. Application range similar to Fipro SG 1023.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page