Technical features
FIPRO SG 562 is a low foam liquid degreaser suitable for washing all metals in both spray washing machines and immersion tanks.
Ideal for removing, even at low temperatures, the most stubborn contaminants such as oils, greases, molding and drawing pastes, and carbonized oils.
FIPRO SG 562 provides, if not rinsed, temporary rust protection on ferrous material. FIPRO SG 562 is suitable for cleaning aluminum and stainless steel molds in the pork and beef processing industries.
Usage and Applications
Spray application:
Use concentrations from 20 to 100 g / l with water. Temperature of 30-70 ° C and contact time of 1-3 minutes. Follow with cold water rinse except in cases where rust protection is required.
Immersion and ultrasonic application:
Use concentrations from 50 to 100 g / l with water. Temperature from 55-75 ° C for at least 3 minutes or more. Follow with cold water rinse. For ultrasonic applications use the lowest concentrations.
Physical-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Clear yellowish liquid |
Specific Weight at 15 °C | 1.300 +/- 0.01 Kg/l |
Rinseability | Good |
Phosphates | Present |
Foam formation | Low |
Control of bathing
Take 10 ml of the solution to be analyzed and place them in the glass beaker (or flask), add 20 ml of distilled water. Add 5-8 drops of FENOPHTHALEIN indicator. The solution will take on a PINK color. Titrate the solution obtained, keeping it stirred, with Hcl N / 10 until a colorless change is obtained. This change identifies the end of the titration.
Applicazione | Concentrazione |
|---|
Alimentation
To obtain the concentration in gr / lt multiply the value obtained by the fixed number 6.2
Then bring the concentration to the required value.
Highlights
Removal of whole and emulsifiable oils, fats and processing pastes
Dephosphating
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Application
Removal of whole and emulsifiable oils, fats and processing pastes
Dephosphating
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Prodotti Correlati
UN PO' DI NOI
