top of page

FIPRO SG 565

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

FIPRO SG 565 is a degreasing liquid product with anti-rust properties on totally synthetic ferrous material and free from nitrites. The main application of this product is in interoperational washes, in spray washing machines, in all mechanical and automotive industries as it very well replaces traditional washes with products based on emulsifiable oils or with powder products containing nitrites.
The table below briefly summarizes the characteristics of the product compared to traditional products.

Usage and Applications

In single-stage washing machines it is used at a concentration of 1.5 - 2.5% with an ambient temperature that can be raised up to 50 - 60 ° C for severe washing requirements.
In multi-stage washing machines it will be sufficient to add the product in the last stage in the ratio of 0.5 - 1.0% to guarantee anti-rust protection.
For applications as immersion protection, concentrations of 3.0 - 5.0% will be adopted with ambient temperatures of 50 ° C.

Physical-Chemical Data

Parametro
Valore
Appearance
Amber liquid
pH
10
Specific Weight
1.050 - 1.060 Kg/l
Boron and derivatives
Absent
Nitrites
Absent
Mineral Oils
Absent
Foam formation
Low
Behavior in hard water
No negative influences

Control of bathing

Take 10 ml of the bath to be analyzed and place them in the flask
Add 5-6 drops of methyl orange indicator, the solution will be YELLOW in color.
Add 100ml of distilled water
Titrate with Hydrochloric Acid (HCl) N / 10 until a persistent RED color of the solution is obtained.
The ml of N / 10 hydrochloric acid consumed in the titration indicate the total alkalinity of the FIPRO SG 565 bath.

Applicazione
Concentrazione

Alimentation

To obtain the concentration in g / l, multiply the value obtained by the fixed number of 3.7.

Highlights

  • Multi-material degreasers

  • Pre and Post processing treatments

  • Low environmental impact alternatives

  • Longevity and effectiveness

  • Periodic checks

  • Formulated, produced and controlled internally

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  •  Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Are you interested?

Write to us and we'll get back to you as soon as possible!

Privacy

I hereby declare that I am sixteen years of age or older, and if under sixteen, that I have been authorised by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

Communications

I consent to the processing of my personal data. For the forwarding of the newsletter, communications via telephone (sms, WhatsApp, voice call)

Related Products

FIPRO SG 560

Solvent-based degreaser, low flammable, suitable for the removal of oils and greases from metal surfaces, in carpentries and workshops. Also suitable for the removal of paints and for the treatment of plastics, after verification of compatibility.

FIPRO SG 562

Low foam liquid degreaser suitable for washing all metals in both spray washing machines and immersion tanks.

Ideal for removing, even at low temperatures, the most stubborn contaminants such as oils, greases, molding and drawing pastes, and carbonized oils.

FIPRO SG 564

Volatile solvent that has a barely perceptible odor.
Designed for all cleaning operations, by rag or immersion, where the use of pure chlorinated solvents is not recommended.

A LITTLE ABOUT US

OUR PRODUCTION

All Fiprokim lines are produced at our facility in Altavilla Vicentina.
The wide range of mixers and equipment allows us to have considerable production power.
Fusti di stoccaggio
FREZZE 4-mod.jpg

Customised products

Fiprokim has a research and development laboratory staffed by technicians specialised in various fields.

The study of technical solutions, the selection and control of raw materials are part of the process of creating an effective product.

OUR COMPANY

Fiprokim has more than 20 years' experience in the research, formulation, production and marketing of chemical products for the treatment of metals  and their cleaning and of coolants for mechanical metalworking.

immagine azienda ridimensionata.jpg
bottom of page