Technical features
FIPROSTEEL 777 is a product formulated for cleaning and final maintenance of stainless steel and aluminum with bright or satin finishes.
It cleanses with a good degreasing power all contamination due to the handling of surfaces, leaving a protective veil on the surface itself.
If the phenomenon recurs due to subsequent manipulations, simply remove them by wiping the surface with a soft cloth.
Physical-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Under pressure |
Smell | Characteristic |
Solubility in Water | Not miscible |
Usage and Applications
As this is a spray product, always have the foresight to use it after shaking the can well in order to obtain a perfect homogenization.
Keep dispensing at a distance of about 20-30 cm from the product to be treated, then after a few minutes wipe with a dry swab.
A light protective film forms on the surface thus treated which, even if it is handled and therefore can bring back some shading, it is sufficient to wipe with a dry swab to make it perfect again.
Applicazione | Concentrazione |
|---|
Warnings
Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50 ° C. Do not pierce or burn after use. Do not inhale the vapors directly. Not smoking. Use only in well ventilated areas. Do not spray on flames or incandescent bodies. Avoid splashing in the eyes. Avoid excessive use. Keep out of the reach of children and away from any source of ignition.
Highlights
Removal of thermal oxides (calamines) from raw materials or semi-finished products
Removal of processing oxides and oily residues or emulsions
Passivation treatments
Final cleaning of the finished product, with preservation of tolerances
Passivation
Application
Degreasing and final cleaning
Stainless steel and aluminum polishing
Stainless steel and aluminum processing sector
Prodotti Correlati
UN PO' DI NOI
