top of page

FIPROSTRIP 284

FORMULATIONS SUITABLE FOR THE REMOVAL OF PAINTS ON ANY SURFACE AND MATERIAL

Technical features

FIPROSTRIP 284 is a newly developed paint stripper free from chlorinated solvents, to increase operator safety and environmental impact.
Compared to paint strippers based on chlorinated solvents, it has a much lower evaporation rate (about 3-5 times less) and is not suspected to be carcinogenic. It does not contain phenols.
The product can be used alone or in combination with the alkaline additive FIPROPLUS 949. The combination of paint stripper and additive makes the bath very performing, especially on powder paints.

Physical-Chemical Data

Parametro
Valore
Appearance
Clear yellowish liquid
Smell
Characteristic
Specific Weight
1.100 Kg/l
Rinseability
Good

Usage and Applications

Use the product as it is, by immersion, preferably by moving the bath, the temperature from room up to 50 ° C, completely immersing the pieces until the paint is removed. Then rinse with plenty of water.
It is advisable to periodically remove paint deposits that accumulate on the bottom.
The containment tanks must be constructed of steel, preferably stainless.
Possibly provide for a neutralization / degreasing tank, where any paint stripper residue not removed with the first rinse is removed from the pieces.

Applicazione
Concentrazione

Alimentation

Top-ups to maintain the volume of the paint stripping bath must always be carried out by adding FIPROSTRIP 284 and the FIPROPLUS 949 alkalinity corrector. Following these indications, it is possible to maintain a correct concentration of the solvent and alkaline component that is consumed during the stripping process.

Storage

Before using the product, read the relative safety data sheet for more information regarding storage and handling.
The solutions of the paint stripping bath and the rinsing water must be sent to a suitable waste treatment plant or to a specific company specialized in recovery and / or disposal.
IN ORDER TO KEEP THE CHARACTERISTICS OF THE PRODUCT UNCHANGED, IT MUST BE STORED AT TEMPERATURES BETWEEN 7 ° C AND 30 ° C.

Highlights

  • Excellent dissolving capacity towards paints

  • Possibility of filtering the bathrooms

  • Low harmfulness for the operator and the environment

  • Slow evaporation, easy to use and long life

  • Excellent alternative to solvent products

Application

  • Stripping of hooks and frames

  • Recovery of defective parts for subsequent repainting

  • Removal of protective paints

Are you interested?

Write to us and we'll get back to you as soon as possible!

Privacy

I hereby declare that I am sixteen years of age or older, and if under sixteen, that I have been authorised by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

Communications

I consent to the processing of my personal data. For the forwarding of the newsletter, communications via telephone (sms, WhatsApp, voice call)

Related Products

FIPROSTRIP 282

Alcohol-based paint stripper with glycol, amine and low potash content. Suitable for the treatment of all metals.

FIPROSTRIP 287

Leading solvent, very efficient, based on strong alkalis and alcohols. Suitable for multimetal treatment, the baths can be filtered.

FIPROSTRIP 285

Ecological solvent, based on alcohols and glycols, formic acid and surfactants. Substitute for methylene chloride, with very low evaporation.

FIPROSTRIP 288

Leading solvent, very efficient, based on strong alkalis and alcohols. Suitable for multimetal treatment, the baths can be filtered.

FIPROSTRIP 286

Ecological solvent, based on alcohols and lactic acid. Version of the 285 less aggressive on metals, non-flammable.

A LITTLE ABOUT US

OUR PRODUCTION

All Fiprokim lines are produced at our facility in Altavilla Vicentina.
The wide range of mixers and equipment allows us to have considerable production power.
Fusti di stoccaggio
FREZZE 4-mod.jpg

Customised products

Fiprokim has a research and development laboratory staffed by technicians specialised in various fields.

The study of technical solutions, the selection and control of raw materials are part of the process of creating an effective product.

OUR COMPANY

Fiprokim has more than 20 years' experience in the research, formulation, production and marketing of chemical products for the treatment of metals  and their cleaning and of coolants for mechanical metalworking.

immagine azienda ridimensionata.jpg
bottom of page