Description
Active neat oil based on solvent-refined mineral oil, suitable for even very heavy-duty cutting operations. The additives contained within allow its use even on hard metals.
Its use is not recommended on yellow alloys, for which the dedicated product is Lubrofip 5007.
Applications
LUBROFIP 5006 is formulated for heavy-duty chip removal operations on carbon steels, alloy steels, and stainless steel. Suitable for turning, drilling, tapping, threading, and broaching operations performed on automatic lathes, and for gear cutting/shaving.
The use of this product is not recommended on non-ferrous materials, particularly on copper alloys.
For these metals, use Lubrofip 5007.
Physico-Chemical Data
Parametro | Valore |
|---|---|
Density at 15 °C kg/l | 0.88 |
Viscosity cSt at 40 °C | 25 |
Flammability OC °C | >200 |
Instructions for use and storage
The product should be used as is.
Keep containers closed and away from heat sources. Avoid storage in direct sunlight (storage temperatures between +5°C and +40°C).
The Fiprokim technical service is at your disposal for consultation and on-site assistance at your company.
Applicazione | Concentrazione |
|---|---|
Highlights
Neat mineral-based oil for heavy-duty machining
Not suitable for yellow alloys
Applications
Machining operations involving cutting and chip removal, including heavy-duty processes such as broaching, gear cutting, turning, drilling, and tapping.
Are you interested?
Write to us and we will reply as soon as possible!
