top of page

ULTRAFIP 634

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

ULTRAFIP 634 is a liquid product, suitable for all metals, specific for the removal of polishing pastes, neat and emulsifiable oils.
It is used with excellent results in electroplating for costume jewelery details and in the eyewear and cutlery industry. Suitable for washing small parts in zamak and aluminum parts.
Thanks to its particular formulation, free from boron, EDTA, chlorinated or petroleum solvents, it does not attack brass, copper, zamak, aluminum, even in cases of prolonged line downtime. The use of ultrasound enhances the cleaning power and above all increases the disintegrating action of the product against the pastes.

Usage and Applications

ULTRAFIP 634 is used in ultrasonic immersion tanks.
Good degreasing results can already be obtained at temperatures of 50-55 ° C; for situations of heavy dirt (eg polishing pastes containing adhesives, very difficult to remove) it may be necessary to operate at temperatures up to 65 ° C.
Pay attention to the operating temperature as the pieces could undergo self-drying.
ULTRAFIP 634 is used in aqueous solution, by immersion, under the following operating conditions:
Bath temperature: 50 - 65 ° C
Treatment time: 3 - 30 minutes
Bath formation 20 - 70 g / l
It is advisable to carry out a thorough rinsing after washing the items.

Parametro
Valore

Control of bathing

Using a graduated pipette, take 10 ml of bath cooled at room temperature and place them in a 250 ml beaker.
Add about 50 ml of demineralized water and 3-4 drops of phenolphthalein indicator.
The solution will turn pink.
Titrate with 0.1 N hydrochloric or sulfuric acid slowly until pink to colorless and read the 0.1N ml of acid consumed, which represents the bath score.

Applicazione
Concentrazione

Alimentation

For each missing point in ml, add 5.3 kg of product per 1000 kg of bath.
The Fiprokim Technical Service will provide, during the start-up phase of the plant, the optimal conditions of use, depending on the quality and quantity of foreign substances to be removed present on the surface of the material and the type of plant itself.

Storage

For the transport, storage, handling and discharge of wastewater, follow the indications and laws in force. For further information on the product consult the Safety Data Sheet.
Store the product in its original sealed packaging in a cool place away from frost and direct sunlight.

Are you interested?

Write to us and we'll get back to you as soon as possible!

Privacy

I hereby declare that I am sixteen years of age or older, and if under sixteen, that I have been authorised by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

Communications

I consent to the processing of my personal data. For the forwarding of the newsletter, communications via telephone (sms, WhatsApp, voice call)

Related Products

ULTRAFIP 632

Acid degreaser, deoxidizer, descaler based on organic acids. Designed for the treatment of aluminum molds, but it is suitable for multimetal treatments.

ULTRAFIP 643

Acid product based on organophosphonic acids. It can be used as a softening pickling agent for welding oxides and as an acid additive to increase the dedusting and antiscaling effect of any type of bath (acid or alkaline).

ULTRAFIP 633

Amine alkaline degreaser, primary amines, soaps, surfactants, sequestrants and cosolvents. Suitable for treatments on iron, steel, yellow alloys, die-cast aluminum and precious alloys.

ULTRAFIP 638

VOC-free degreaser for the removal of pastes and oils from cutlery and eyewear. Based on tertiary amines, soaps, dedusting agents, sequestrants, inhibitors and cosolvents.

A LITTLE ABOUT US

OUR PRODUCTION

All Fiprokim lines are produced at our facility in Altavilla Vicentina.
The wide range of mixers and equipment allows us to have considerable production power.
Fusti di stoccaggio
FREZZE 4-mod.jpg

Customised products

Fiprokim has a research and development laboratory staffed by technicians specialised in various fields.

The study of technical solutions, the selection and control of raw materials are part of the process of creating an effective product.

OUR COMPANY

Fiprokim has more than 20 years' experience in the research, formulation, production and marketing of chemical products for the treatment of metals  and their cleaning and of coolants for mechanical metalworking.

immagine azienda ridimensionata.jpg
bottom of page